HP UX 11i v2 Networking Software manual Show ib sm multicast, Show ib sm neighbor

Subnet Manager Configuration Summary

============================================================================

subnet-prefix	guid	priority sm-key
----------------------------------------------------------------------------
fe:80:00:00:00:00:00:00	00:05:ad:00:00:00:13:f5	10	00:00:00:00:00:00:00:00
HP-IB#

Defaults: This command has no defaults.

Related Commands: “show ib-agent switch” (page 156) “interface ib” (page 186)

show ib sm multicast

Synopsis: The show ib sm multicast command shows the multicast groups configured on the device.

Syntax: show ib sm multicast [subnet-prefixsubnet-prefix summary]

Table B-12 show ib sm multicast Command Syntax Descriptions

Syntax Description

subnet-prefixsubnet-prefix Shows the multicast groups managed by the Subnet Manager on the specified device.

summary An abridged form of the data may be returned by including the summary keyword at the end of the command line. The abridged information includes the subnet prefix, GUID, priority, and SM Key of the subnet managers.

Command Modes: User-execute and privileged-execute modes.

Privilege Level: InfiniBand read-only user.

Usage Guidelines: <CONFIRM SOMETHING IS NEEDED >Add description of output.

Examples:

HP-IB# show ib sm multicast summary

==============================================================================

Summary of Multicast-Groups on Device

==============================================================================

subnet-prefix : fe:80:00:00:00:00:00:00

MGID : ff:12:40:1b:ff:f1:00:00:00:00:00:00:ff:ff:ff:ff

multicast-group-members :

port-GID : fe:80:00:00:00:00:00:00:00:05:ad:00:00:00:12:bf member-join-state : full-member

proxy-join-status : falsesubnet-prefix : fe:80:00:00:00:00:00:00 MGID : ff:12:40:1b:ff:f9:00:00:00:00:00:00:ff:ff:ff:ff

Defaults: This command has no defaults.

Related Commands: “ib sm subnet-prefix” (page 182)

show ib sm neighbor

Synopsis: The show ib sm neighbor command shows the interconnection of all the ports of all the nodes on the InfiniBand subnet. In addition, this command shows the node status, type, and respective GUIDs.

Syntax: show ib sm neighbor

Command Modes: User-execute and privileged-execute modes.

Privilege Level: InfiniBand read-only user.

Usage Guidelines: The fields in the show ib sm neighbor window are described in the table below.

Show Commands 143