HP UX 11i v2 Networking Software manual Syntax Example itutil -t IB Output Example

Displaying Interfaces with Specified Transport Type Description: This parameter only displays

interfaces of a specific transport type. The only supported transport type with this version of the product is IB.

Syntax: itutil -t[transport_type]

Syntax Example: itutil -t IB

Output Example:

========================================================================

Number of Interface Adapters on this node: 1

========================================================================

Interface Adapter Name : ib0

IA Type : IB (Low Profile)

H/W Path : 0/4/1/0/0/0 Transport Type : IT_IB_TRANSPORT

IT API Version Number : 1.0 IA Software Version Number : 1.0 IA Firmware Version Number : 3.1.0

Firmware Type : Performance

IA supported transport service types : IT_RC_SERVICE

Number of Spigots(Ports) on IA : 2

Spigot specific Information

Spigot identifer : 1

Spigot online : YES

Num Network Addresses : 1

Primary Network Address : fe80::ca07:2001

Spigot identifer : 2

Spigot online : NO

Num Network Addresses : <Unassigned>

========================================================================

Displaying Statistics Description: This parameter displays statistics for all specified adapters. In the example below, the HP Fabric interface adapter is specified as ib0 and defined with the -iparameter. If an adapter is not specified using the -iparameter, the -scommand displays statistics for each HP Fabric interface configured on the host.

NOTE: The transport statistics are the same as those defined in Chapter 10 of IBA 1.1 Vol 1. Link/physical statistics are the same as the PortCounter attribute defined in Chapter 16 of the IBA 1.1 Vol 1.

Syntax: itutil -s[-i interface name-t transport type]

Syntax Example: itutil -s-i ib0

Output Example:

========================================================================

Number of Interface Adapters on this node: 1

========================================================================

Interface Adapter Name : ib0

IA Type : IB (Standard)

H/W Path : 0/4/1/0/0/0 Transport Type : IT_IB_TRANSPORT

IT API Version Number : 1.0 IA Software Version Number : 1.0 IA Firmware Version Number : 3.1.0

Firmware Type : Performance

IA supported transport service types : IT_RC_SERVICE

HP-UX Host Administration and Management 61