HP UX 11i v2 Networking Software manual Show card-inventory, Synopsis

show card-inventory

Synopsis:	The show card-inventorycommand polls individual system interface cards for
their system resources and the image data residing on the interface card.
Syntax:	show card-inventory{card# card#-card# card#,card#,card#... all}
This command has the following arguments:
show card-inventory Syntax Description
Table B-6	show card-inventory Command Syntax Descriptions
Syntax	Description
card#	Refers to an individual slot number.
card#-card#	Refers to a range of slot numbers. Displayed in the form card#-card#

card#,card#,card#...	Refers to a list of slot numbers in the form card#,card#,…Do not add spaces between elements
	in the list.
all	Displays all cards. The CLI defaults to “add” if you only enter the show card command.

Command Modes: User-execute and privileged-execute modes.

Privilege Level: General read-only user.

Usage Guidelines: Each system interface card is a system in itself. System resources comprise:

•available and used memory

•available and used flash memory space

•system-image on the interface card

•CPU name and version

The system-image should match the image that is on the controller card. Occasions may occur when you update the system-image on the controller but it is not propagated to an interface card, such as when swapping interface cards between chassis or updating the system-image on the controller when an interface card is down.

Disk space may be an issue if you try to update the system-image on the controller but cannot propagate this data to the interface card because the interface card is full.

The CPU description may be requested by support-personnel in the event you are experience difficulties with a controller or interface card.

The fields in the show card-inventory output are described in the table below.

Table B-7 show card-inventory Command Field Descriptions

Field	Description
slot-id	Slot number of the controller card.
used-memory	Total amount of local RAM being used by the card.
free-memory	Total amount of available local RAM.
used-disk-space	Total amount of local flash memory space being used by the card.
free-disk-space	Total amount of available local flash memory space.
primary-image-source	Indicates the system-image to use the next time the system is rebooted or power-cycled.
	This value should be the same for all cards in the system.
image	If there is only instance of the image field, it indicates the system-image used to initialize
	the card firmware. If there are two instances of the image field, the second instance indicates
	a second system-image present on the card.
cpu-descr	CPU type, model, and firmware version.

Examples: To display the configuration and status information for controller:

138 Switch Command Line Interface