HP UX 11i v2 Networking Software manual Show ib sm partition

local-portnum : 2 vendor-id : 00:05:ad

subnet-prefix : fe:80:00:00:00:00:00:00 node-guid : 00:05:ad:00:00:00:13:da

base-version : 1 class-version : 1

type : switch num-ports : 9

port-guid : 00:05:ad:00:00:00:13:da partition-cap : 1

device-id : 0 revision : 0 local-portnum : 1

vendor-id : 00:05:ad…

The following example displays a node configuration in summary form.

HP-IB# show ib sm node subnet-prefix fe:80:00:00:00:00:00:00 node-guid 00:05:ad:00:00:00:13:80 summary

============================================================================

Subnet Manager Node Summary

============================================================================

subnet-prefixnode-guidnode-type vendor-id

----------------------------------------------------------------------------

fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:80 channel adapter	00:05:ad
HP-IB#

The following example displays a node configuration in summary form.

HP-IB# show ib sm node subnet-prefix fe:80:00:00:00:00:00:00 node-guid 00:05:ad:00:00:00:13:80 summary

============================================================================

Subnet Manager Node Summary

============================================================================

subnet-prefixnode-guidnode-type vendor-id

----------------------------------------------------------------------------

fe:80:00:00:00:00:00:00 00:05:ad:00:00:00:13:80 channel adapter	00:05:ad
HP-IB#

Defaults: This command has no defaults.

Related Commands: “ib sm subnet-prefix” (page 182)

show ib sm partition

Synopsis: The show ib sm partition command displays partitions managed by Subnet Managers on the device.

Syntax: show ib sm partition

Command Modes: User-execute and privileged-execute modes.

Privilege Level: InfiniBand read-only user.

Usage Guidelines: In the output, 7f:ff refers to the default Partition, which cannot be altered. Members of Partitions are identified by their Node GUID and port-number, as displayed below.

A single Partition can have members that are both full-membership, as well as members that have limited membership.

Examples: The following example displays the configuration of all the nodes on all the subnets on the InfiniBand fabric.

HP-IB# show ib sm partition

===============================================================================

Partitions Managed By The Subnet Managers

===============================================================================

subnet-prefix : fe:80:00:00:00:00:00:00 p_key : 7f:ff

partition-members :

node-guid : 00:05:ad:00:00:00:02:40 port-number : 0

member-type : full-member node-guid : 00:05:ad:00:00:00:02:42

port-number : 0

member-type : full-member node-guid : 00:05:ad:00:00:00:02:42 port-number : 0

member-type : full-member

Defaults: This command has no defaults.

Related Commands: “ib sm subnet-prefix” (page 182)

146 Switch Command Line Interface