HP UX 11i v2 Networking Software manual Show ib sm node subnet-prefix

Table B-13 show ib sm neighbor Command Field Descriptions

Field	Description
subnet-prefix	64-bit value that identifies the InfiniBand subnet to which this node belongs.
local-node-guid	64-bit GUID of the InfiniBand node.
local-port-id	Port ID of the InfiniBand node. The value is an integer between 0 and 255.
local-node-type	Type of the InfiniBand node. The value is channel-adapter, switch, or router.
remote-node-guid	64-bit Guid of the neighboring InfiniBand node to which the local node is linked.
remote-port-id	Port ID of the neighboring InfiniBand node to which the local node is linked. The value is an
	integer between 0 and 255.
remote-node-type	Type of the neighboring InfiniBand node. The value is channel-adapter, switch, or router.
link-stat	State of the link between the local and neighboring nodes. The value is noStateChange, down,
	initialize, armed, or active.
link-width-active	Active link width. This parameter is used with LinkSpeedActive to determine the link rate
	between the two connected nodes. The value is width1x, width4x, or width12x.

Examples:

HP-IB# show ib sm neighbor

============================================================================

Subnet Management Neighbor

s============================================================================ subnet-prefix : fe:80:00:00:00:00:00:00

local-node-guid : 00:05:ad:00:00:00:11:97 local-port-id : 2

local-node-type : channel-adapter remote-node-guid : 00:05:ad:00:00:00:13:da

remote-port-id : 1 remote-node-type : switch

link-state : active link-width-active : width4x

subnet-prefix : fe:80:00:00:00:00:00:00 local-node-guid : 00:05:ad:00:00:00:13:da

local-port-id : 1 local-node-type : switch remote-node-guid : 00:05:ad:00:00:00:11:97

remote-port-id : 2 remote-node-type : channel-adapter

link-state : active link-width-active : width4x…

<output truncated>

Defaults: This command has no defaults.

Related Commands: “ib sm subnet-prefix” (page 182)

show ib sm node subnet-prefix

Synopsis: The show ib sm node subnet-prefixcommand displays the configuration and attributes of subnet management nodes in a specified subnet or the whole InfiniBand fabric.

Syntax: show ib sm node subnet-prefix subnet prefix [ all node guid summary]

The arguments associated with this command are described below:

Table B-14 show ib sm node subnet-prefix Command Syntax Descriptions

Syntax Description

subnet-prefixEnter the subnet prefix of the subnet manager that you want to display. subnet prefix

all Displays all subnet information in the InfiniBand fabric.

144 Switch Command Line Interface