Lucent Technologies GW-DS300N manual Basic Installation & Configuration

Page 32

WPA2 is short for Wi-FI Protected Access 2, the follow on security

2

method to WPA for wireless networks that provides stronger data

 

protection and network access control. It provides enterprise and consumer

 

Wi-Fi users with a high level of assurance that only authorized users can

 

access their wireless networks. There are two versions of WPA2: WPA2-

 

Enterprise, and WPA2-Personal. WPA2-Enterprise verifies network users

 

through a server. WPA2-Personal protects unauthorized network access

 

by utilizing a set-up password. For environments without a Remote

 

Authentication Dial-In User Service (RADIUS) infrastructure such as

 

small office/home office (SOHO) networks, WPA2-Personal supports the

 

use of a pre-shared key (PSK).

 

WPA2-PSKis short for Wi-Fi Protected Access 2-Pre-Shared Key. WPA2-

 

Personal supports PSK(pre-shared key). WPA-PSKand WPA2-PSKare

 

special modes designed for small office/home office users who do not have

 

access to the network authentication servers.

 

If you want to use WPA as the authentication of GW-DS300N, you can

 

refer to the following instructions to do the configuration.

 

27

Chapter 2 Basic Installation & Configuration

Image 32
Contents Page IEEE802.11n Wireless PCIBus Adapter Foreword FCC Certifications Contents Advanced Configuration Introduction to GW-DS300N Package Contents FeaturesProduct Functions 2Basic Installation & Configuration How to install the driver and utility Basic Installation & Configuration GW-DS300N Basic Installation & Configuration How to make a wireless connection Basic Installation & Configuration GW-DS300N Authentication and Security Click on the Authentication GW-DS300N Basic Installation & Configuration GW-DS300N Site Survey Launch Config Utilties Use Zero Configuration as Configuration utilitySwitch to AP Mode ExitItems Descriptions ClickConnectUnknown,WPA-PSK,WPA2-PSK,WPA Ad-hocandInfrastructureProÀle Items Descriptions Configuration PSM Power Saving Mode When GW-DS300NBasic Installation & Configuration GW-DS300N Basic Installation & Configuration Authentication and Security Basic Installation & Configuration Infrastructure mode As the settings of the destinationThere are seven authentication types under Basic Installation & Configuration WEP Key Basic Installation & Configuration 6 802.1x Setting Reauthentication, Roaming, SameSsidand Always CA Server Basic Installation & Configuration GW-DS300N Link Status GW-DS300N Receive Statistics StatisticsItems Descriptions Transmit Statistics Buttons 3Advanced Configuration3 Auto-Based on the status of the network Advanced Configuration GW-DS300N QoS Not sit idle waiting for input that may never come WPS ConÀguration Start PBCGW-DS300N II. Start PIN GW-DS300N Advanced Configuration About Advanced Configuration Soft AP Mode How to use AP modeConÀg Wireless Mode Scroll down the list to choose the wireless Only and 802.11 B/G/N mix.Shown in the4.3. Security Setting Short Slot GW-DS300N Security Setting ItemsDescriptions AuthenticationGW-DS300N Soft AP Mode Access Control Disable ,Allow All , andReject All . The defaultSoft AP Mode MAC Table AIDSoft AP Mode Event Log Soft AP Mode Frames Transmitted Successfully After Retry Buttons Utility and Driver. Eeprom Electrically Soft AP Mode