Lucent Technologies GW-DS300N manual Auto-Based on the status of the network

		Auto–Based on the status of the network and
		automatically disable/enable protection mode.
		On–Always enable the protection mode.
3
		Off–Always disable the protection mode.
	Tx Rate	There are several options including Auto/1/2/5.5/11/
		6/9/12/18/24/36/48/54Mbps for you to select. When
		“Auto”is selected, the device will choose the most
		suitable transmission rate automatically. The higher
		data rate you designated in the network, the shorter
		distance is allowed between the adapter and the
		wireless stations.
		When the wireless mode is“802.11 B only”, the
		maximum data rate is 11Mbps (11b) so that there are
		only “Auto/1/2/5.5/11Mbps” options you can select.

Tx Burst

Enable TCP Window Site

Tx Burst enables the adapter to deliver better throughput during a period of time but the function only takes effect when connecting with the AP which also supports Tx Burst.

The TCP Window is the amount of data which a sender can send on a particular connection before it gets an acknowledgment back from the receiver that it has gotten some of it. When the Router or AP which the adapter is connecting to has set up the TCP Window, you can enable the parameter to meet the data size for the Router or AP connection. The larger TCP Window the better performance.

Fast Roaming at ~ When you want to fast roaming to the network nearby

	dBm	without intercepting the wireless connection
42
	GW-DS300N