Lucent Technologies GW-DS300N manual Event Log

Page 72

4.6 Event Log

Click on the“Event Log”tab on the homepage of the AP mode, the page will display the happened events after start up GW-DS300N The Event

4Log page will show you the time and the description of every event happened on Soft AP.

Items

Descriptions

Event Time

Here shows the time when event happened.

(yy/mm/dd-hh:mm:ss)

 

Message

The utility will depict every event happened on the

 

Soft AP, including restart AP or station is failed to

 

link or success to link, and so on.

Clear

Click this button to delete all the previous event logs.

OK

Click this button and the utility will save the settings

 

and close the page.

68

GW-DS300N

Image 72
Contents Page IEEE802.11n Wireless PCIBus Adapter Foreword FCC Certifications Contents Advanced Configuration Introduction to GW-DS300N Package Contents FeaturesProduct Functions 2Basic Installation & Configuration How to install the driver and utility Basic Installation & Configuration GW-DS300N Basic Installation & Configuration How to make a wireless connection Basic Installation & Configuration GW-DS300N Authentication and Security Click on the Authentication GW-DS300N Basic Installation & Configuration GW-DS300N Site Survey Launch Config Utilties Use Zero Configuration as Configuration utilitySwitch to AP Mode ExitItems Descriptions ClickConnectUnknown,WPA-PSK,WPA2-PSK,WPA Ad-hocandInfrastructureProÀle Items Descriptions Configuration PSM Power Saving Mode When GW-DS300NBasic Installation & Configuration GW-DS300N Basic Installation & Configuration Authentication and Security Basic Installation & Configuration As the settings of the destination There are seven authentication types underInfrastructure mode Basic Installation & Configuration WEP Key Basic Installation & Configuration 6 802.1x Setting Reauthentication, Roaming, SameSsidand Always CA Server Basic Installation & Configuration GW-DS300N Link Status GW-DS300N Statistics Items Descriptions Transmit StatisticsReceive Statistics Buttons 3Advanced Configuration3 Auto-Based on the status of the network Advanced Configuration GW-DS300N QoS Not sit idle waiting for input that may never come WPS ConÀguration Start PBCGW-DS300N II. Start PIN GW-DS300N Advanced Configuration About Advanced Configuration Soft AP Mode How to use AP modeConÀg Wireless Mode Scroll down the list to choose the wireless Only and 802.11 B/G/N mix.Shown in the4.3. Security Setting Short Slot GW-DS300N Security Setting ItemsDescriptions AuthenticationGW-DS300N Soft AP Mode Access Control Disable ,Allow All , andReject All . The defaultSoft AP Mode MAC Table AIDSoft AP Mode Event Log Soft AP Mode Frames Transmitted Successfully After Retry Buttons Utility and Driver. Eeprom Electrically Soft AP Mode