Lantronix 900-332 manual Automatic IP Address Configuration, Static IP Address Configuration

Configuration Using Web-Manager

Figure 4-2. Network Settings

Automatic IP Address Configuration

To automatically assign an IP address and its network configuration:

1.Click Network from the main menu.

2.Select Obtain IP address automatically.

3.Enter the following (as necessary):

Disable BOOTP	Leave the checkbox empty to enable Bootstrap Protocol
	(BOOTP). The BOOTP server automatically assigns the IP
	address from a pool of addresses.
Disable DHCP	Leave the checkbox empty to enable Dynamic Host
	Configuration Protocol (DHCP). DHCP automatically assigns
	a leased IP address to the WiPort unit.
Disable Auto-IP	The WiPort generates an IP in the 169.254.x.x address range
	with a Class B subnet. Select the checkbox to disable this
	feature.
Host Name	Enter the name of the host on the network.

Note: Disabling BOOTP, DHCP, and Auto-IP (i.e. all three checkboxes) is not advised as the only available IP assignment method will then be ARP or serial port.

4. Click the OK button when finished.

Static IP Address Configuration

To manually assign an IP address and its network configuration:

WiPort™ User Guide 4-3