Lantronix 900-332 manual Recipients, Conditions, Configurable Pins, Enable Serial Trigger, Input

Recipients		Configuration Using Web-Manager
	Recipient 1: Email	Enter the email address designated to receive email
	Address	notifications.
	Recipient 2: Email	Enter an additional email address designated to receive email
	Address	notifications.

Trigger Configuration

A trigger event occurs when the unit receives the specified trigger input as a result of a specified combination of conditions on the configurable pins.

Set the configurable pins to Active, Inactive, or None. The configurable pins are disabled if they are all set to None. If both the serial sequence and the configurable pins are disabled, the trigger is disabled.

To configure the WiPort’s email trigger settings:

1.From the main menu, select Trigger 1, Trigger 2, or Trigger 3 to configure the desired Trigger settings. The Email Trigger Settings page opens.

Figure 4-9. Email Trigger Settings

2. Configure the following fields:

Conditions

Configurable Pins	Select the condition from the pull down menu for the
	configurable pins. Repeat for each Trigger Input field.
Enable Serial Trigger	When selected, specified serial communications count as a
Input	trigger input.

WiPort™ User Guide 4-13