Lantronix 900-332 manual Server Configuration, Advanced

Server Configuration		Configuration Using Web-Manager
	Telnet Password	Enter the password required for Telnet access.
	Retype Password	Re-enter the password required for Telnet access.
Advanced
	ARP Cache Timeout	When the unit communicates with another device on the
		network, it adds an entry into its ARP table. ARP Cache
		timeout defines the number of seconds (1-600) before it
		refreshes this table.
	TCP Keepalive	TCP Keepalive time defines how many seconds the unit waits
		during an inactive connection before checking its status. If the
		unit does not receive a response, it drops that connection.
		Enter a value between 0 and 60 seconds. 0 disables
		keepalive.

Host List Configuration

The WiPort scrolls through the host list until it connects to a device listed in the host list table. After a successful connection, the unit stops trying to connect to any others. If this connection fails, the unit continues to scroll through the table until the next successful connection.

The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains an IP address and a port number.

Note: The host list is disabled for Manual and Modem Mode. The unit will not accept a data connection from a remote device when the hostlist option is enabled.

To configure the WiPort’s host list:

1. From the main menu, click the Hostlist tab.

WiPort™ User Guide 4-5