Lantronix 900-332 Configure the following fields, Change Address Table, Mail Server IP Address

Configuration Using Web-Manager

Remote Port	Enter the port number of the remote device.
Remote Host	Enter the IP address of the remote device.
Change Address Table	Field enabled when Datagram Type is set to FD. Enter values
	between 1-255 to identify units on the local network of device
	servers.

Email Configuration

The unit sends an Email to multiple recipients when a specific trigger event occurs. There are three separate triggers, based on any combination of the configurable pins when selected as user I/O functions. Optionally, use a two-byte serial string to initiate a trigger. Each trigger is independent of the others. Each condition within an individual trigger must be met before the unit will send the Email.

To configure the WiPort’s email settings:

1.From the main menu, select Email to open the Email Settings window.

Figure 4-8. Email Settings

2. Configure the following fields:

Mail Server IP Address	Enter the IP address of the mail server.
Domain Name	Enter the Email server’s domain name.
Unit Name	Enter the username used by the WiPort to send Email
	messages.

4-12 WiPort™ User Guide