Lantronix 900-332 manual Port Numbers Reserved for, Connect Mode Option

Configuration Via Serial Mode or Telnet Port

Table 5-5. Reserved Port Numbers

	Port Numbers	Reserved for
	1 – 1024	Reserved
9999		Telnet setup
14000-14009		Reserved for Redirector
30704		Reserved (77F0h)
30718		Reserved (77FEh)

Note: It is recommended to not use the reserved port numbers for this setting as incorrect operation may result.

Use Port 0 for the outgoing local port to change with each connection. The port range is 50,000 to 59,999. Each subsequent connection increments the number by 1 (it wraps back around to 50,000).

Only use this automatic port increment feature to initiate a connection using TCP. Set the port to a non-zero value when the unit is in a passive mode or when using UDP instead of TCP.

Connect Mode

Connect Mode defines the unit’s connection method and its reaction to incoming connections over the network. The current value is displayed in parentheses.

ConnectMode (C0) ? _

Enter Connect Mode options in hexadecimal notation:

Table 5-6. Connect Mode Options

Connect Mode Option 7 6 5 4 3 2 1 0

a)Incoming Connection

Never accept incoming		0	0	0
Accept with modem-control_in Active		0	1	0
Always Accept		1	1	0
b)	Response
Nothing (quiet)					0
Character response (C=connect,					1
D=disconnect, N=unreachable)
c)	Active Startup
No active startup						0	0	0	0
With any character						0	0	0	1
With modem_control_in Active						0	0	1	0

WiPort™ User Guide 5-7