Lantronix 900-332 manual Select Use the following IP configuration, IP Address, Subnet Mask

Configuration Using Web-Manager

1.Click Network from the main menu.

2.Select Use the following IP configuration.

3.Enter the following (as necessary):

IP Address	If DHCP is not used to assign IP addresses, enter it manually.
	The IP address must be set to a unique value in the network.
Subnet Mask	A subnet mask defines the number of bits taken from the IP
	address that are assigned for the host part.
Default Gateway	The gateway address, or router, allows communication to
	other LAN segments. The gateway address should be the IP
	address of the router connected to the same LAN segment as
	the unit. The gateway address must be within the local
	network.

4. Click the OK button when finished.

Server Configuration

The unit’s server values display upon selecting Server from the main menu. The following sections describe the configurable parameters within the Server configuration menu.

Figure 4-3. Server Settings

To configure the WiPort’s device server settings:

1.Click Server from the main menu.

2.Configure or modify the following fields:

4-4 WiPort™ User Guide