Lantronix 900-332 manual Connect Protocol, Connect Mode Passive Connection

Configuration Using Web-Manager

Connect Protocol

Protocol

Select TCP from the pull down menu.

Figure 4-6. TCP Connection Settings

Connect Mode: Passive Connection

Accept Incoming	Select Yes to accept incoming connections.
Password Required	Determines whether a password is required for an incoming
	passive connection. Field is not available when a password is
	set for Telnet mode.
Password	If Password Required was set to Yes, enter the password for
	passive connections.

Connect Mode: Active Connection

Active Connect	Select None to disable Active Connect. Otherwise, indicate
	the connection type from the available list. Never Accept
	Incoming rejects all external connection attempts. Accept
	with modem_control_in Active accepts external connection
	requests only when the modem_control_in input is asserted.
	Cannot be used with Modem Mode. Always Accept accepts
	any incoming connection when a connection is not already
	established.
Start Character	If Active Connect is set to With Start Character, enter the
	start character in this field.
Modem Mode	Indicates the on-screen response type when in Modem Mode
	(if enabled).

WiPort™ User Guide 4-9