Lantronix 900-332 manual Option

Configuration Via Serial Mode or Telnet Port

Function 7 6 5 4 3 2 1 0

Clear when the network connection to or from the device is disconnected

1

Output Buffer (Network to Serial)

Clear with a connection that is initiated from the device to the network

Clear with a connection initiated from the network to the device

Clear when the network connection to or from the device is disconnected

1

1

1

Alternate Packing Algorithm (Pack Control)

Enable

1

Pack Control

The packing algorithm defines how and when packets are sent to the network. The standard algorithm is optimized for applications in which the unit is used in a local environment. The alternate packing algorithm minimizes the packet count on the network and is especially useful in applications in a routed Wide Area Network (WAN). Adjusting parameters in this mode can economize the network data stream.

Pack control settings are enabled in Flush Mode. Set this value to 00 if specific functions are not needed.

Table 5-12. Pack Control Options

Option	7	6	5	4	3	2	1	0
Packing Interval
Interval: 12ms							0	0
Interval: 52ms							0	1
Interval: 250ms							1	0
Interval: 5sec							1	1
Trailing Characters
None					0	0
One					0	1
Two					1	0
Send Characters
2-Byte Send Character				1
Sequence
Send Immediately After			1
Send chars

WiPort™ User Guide 5-15