IB_KH2201_02_AR909_UK_3.qxd 12.11.2007 10:52 Uhr Seite 9
Radio operation
1.To switch on, turn the volume controller VOLUME / BUZZ g, until an audible »Click« is heard.
2.Using the volume controller VOLUME / BUZZ g now set the desired volume.
3.Set the waveband selector switch ; to the desired wavelength range (FM/AM).
4.Adjust the tuning wheel f to select the desired radio station. The frequencies can be read off from the frequency scale y.
5.To switch off, turn the volume controller VOLUME / BUZZ g until an audible »Click« is heard (KH 2201.Turn the volume controller upwards, KH 2202: Turn the volume controller to the rear).
Setting up the telescope aerial
On Model KH 2201:
• Extend the telescope aerial w completely.
The telescope aerial w on Model KH 2201 is not rotatable.
If you try to turn the telescope aerial w, the aerial mounting will be damaged.
On Model KH 2202:
•Remove the telescope aerial w from its retainer and set it up.
•Extend the telescope aerial w completely.
To improve reception in the FM frequency range, slowly turn the end of the telescope aerial w in various directions. As soon as you have found a position with good reception from your desired radio station, leave the telescope aerial
win this position. For the reception of AM transmitters, an aerial is built into the appliance. For improved reception, alter the position of the appliance in radio mode.
-9 -