10.3 Manual HyperTerminal Configuration
qThe configurable settings are: o Protocol
o Baud Rate o Parity
o # of Stop Bits o Charcter Set
o POS Device Type
1.The following screen (or similar) will confirm that you are in HyperTerminal programming mode.
Initializing from DIP
Switches
Kalatel ProBridge III POS
Ver: 2.10
Camera: 16
2.Once HyperTerminal mode is set up, press the “Enter” key twice. The following menu will appear:
Main Menu
1.Exit
2.Port #2
3.Backup
To make a menu selection, enter the number of the element and press “Enter”.
For example:
Input the following | 2 | ENTER | (Port #2) |
Kalatel | 28 |