GE CBR-PB3-WD ProBridge, Kalatel CBR-PB3-WD Description, Compatibility, Disclaimer

1 CBR-PB3-WD ProBridge

1.1 Kalatel CBR-PB3-WD Description

The Kalatel CBR-PB3-WD is a specific ProBridge unit for interfacing the DVMRe family of digital video multiplex/recorders Wayne Plus Receipt Printers (WP/RJ).

One CBR-PB3-WD is required per cash register. Where multiple cash registers are connected to a single DVMRe unit, the individual CBR-PB3-WD’s are interconnected via the PB3’s built-in RS-485 network.

1.2 Additional Equipment Provided by the

Installer

Installations requiring multiple CBR-PB3-WD units are interconnected via the unit’s built-in RS-485 network, the installer will need to provide suitable length RS-485 cable terminated with RJ-45 connectors.

1.3 Compatibility

The CBR-PB3-WD is compatible with the following DVMRe products:

DVMRe Type	Software Version	PPC Version
DVMRe-CD/CS	V 3.07 (and above)	V 3.07 (and above)
DVMRe-eZ	V 3.20 (and above)	V 3.14 (and above)
DVMRe-CT (Triplex)	V 4.0 (and above)	N/A
DVMRe-eZT (Triplex)	V 4.03 (and above)	N/A
StoreSafe Advanced	V 4.06 (and above)	N/A

To verify the software version in your unit, either note the display which identifies the version when the unit boots-up, or view the version information by clicking the About box in the unit’s menu system.

1.4 Disclaimer

The Kalatel ProBridge components identified within this document provide means of capturing transaction text/data for use by the DVMRe family of digital video recording/transmission products. The ProBridge components translate the data into a usable format by the DVMRe and permits associating transaction data with specific cameras. Kalatel assumes no responsibility for the amount and type of information available, the operation, non-operation or erroneous operation of the customer provided equipment the ProBridge connects to.

Kalatel CBR-PB3-WD 5 0150-0261A