GE CBR-PB3-WD installation manual Copyright Information

Page 2

Warning!

To prevent fire and electronic shock, do not expose this product to rain or moisture.

The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the! literature accompanying the product.

Caution!

To prevent electric shock, do not remove cover. No user

!

serviceable components inside. Refer servicing to qualified

 

service personnel.

 

Caution! Electrostatic-Sensitive Device!

Use proper CMOS and MOSFET handing precautions, including approved grounded wrists straps, etc., to avoid damage to this unit or its internal components, from electric discharge.

Warning!

This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions in this manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to subpart J of part 15 of FCC rules which are designed to provide reasonable protection against such interference when operated in a commercial environment. This equipment has also been tested and found to comply with the requirements for a CE Class A device and TUV safety standards.

Operation of this equipment in a residential area may cause interference, in which case the user is required to take all measures that are necessary, at the user's expense, to correct the interference.

Copyright Information

Software and/or firmware is furnished to the purchaser under a license for use on a single system. Software and/or firmware included with this equipment are the sole proprietary property of, confidential to, and copyrighted by Kalatel, Corvallis, Oregon, USA. The software/firmware are not to be copied or disclosed in any manner without the express written consent of Kalatel.

All information and specifications furnished by Kalatel are believed to be accurate and reliable. No responsibility is assumed by Kalatel for neither its use nor any infringements of rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Kalatel.

The KALATELbrand name and product model numbers are the property of Kalatel.

©COPYRIGHT, 2003: The contents of this manual may not be copied or reproduced in any manner or form without the prior written consent of Kalatel.

Kalatel CBR-PB3-WD

2

0150-0261A

Image 2
Contents Kalatel CBR-PB3-WD ProBridge Receipt Printer Interface Copyright Information Table of Contents Cable Specifications Warranty and Service 14.1 Factory Service 14.2 WarrantyKalatel CBR-PB3-WD Description Additional Equipment Provided by InstallerCBR-PB3-WD ProBridge CompatibilityBefore You Begin Installation SummaryHow to Use this Manual Kalatel Components4310-0007 120VAC Power Supply Installation EnvironmentPower 4310-0008 220VAC Power Supply Tolerance ±10% Frequency 50 Hz Power Supply OutputProBridge Diagram Default Factory Dipswitch Settings Important Switch AssignmentsConnection Diagram DVMRe TriplexTermination Switch Sample Systems TerminationDetailed Installation Steps PB3 Physical InstallationProcess several POS transactions at the Cash Register Configuring the PB3 for POS InterfaceAssociating ECR data to a specific camera Kalatel CBR-PB3-WD 0150-0261A Display Memory Demo Simulated Message ModeSpecial Functions Reset Clear Memory Kalatel CBR-PB3-WD 0150-0261A Up Off = U Down On = D TroubleshootingSwitch Setting Baud Rate Port 1200 2400 4800 9600 14.4k 19.2k 38.4kTroubleshooting Guide Text to Camera Address SW1 DipswitchesDipswitch 5 Camera Assignment Dipswitch Numbers SW1 Baud Rate Manual Switch ConfigManual Dipswitch Settings Available Protocol Kalatel CBR-PB3-WD 0150-0261A HyperTerminal Setup Equipment RequiredSetting up the ProBridge for HyperTerminal Operation Manual HyperTerminal Configuration Setup Option 2 Port #2 Menu Selection 2 Protocol Options q AsynchronousMenu Selection 4 Parity Menu Selection 5 Mode The available selections areMenu Selection 3 Baud Rate Menus Selection 7 Device Type q Generic Receipt PrinterCommunicationsRS-232Port 1 ATM Activate DVMRe-CS/CD Setup11 PB3-POS with DVMRe -CD/CS Units Final Testing RJ-45 Connector DB9F Connector Cable SpecificationsRJ-45 Connector ProBridge to Triplex DVMRe-CTDB9F Connector DB9F and DB9M Connector Communication Type RS-485 Connector Type RJ45, RJ45RJ45 Connector ProBridge to ProBridge CableSpecifications Warranty Warranty and ServiceFactory Service Factory AddressAdvance Replacement Policy