Unpacking the Matrix
Figure 3-2 Disassembly Steps 3 and 4
| 2 | 1 | |
7 | 3 | 6 | |
4 | |||
| |||
|
|
5
1 | Accessory package | 5 | RJ45 management cable |
2 | Screw assemblies packet | 6 | Styrofoam cap |
3 | ESD wrist strap packet | 7 | Rack support brackets |
4Documentation
5.Open the top of the shipping bag covering the unit, then pull the bag down around the skid, as shown in Figure 3‐3.
Figure 3-3 Disassembly Step 5
13
| 2 | 1 |
|
| |
1 Shipping bag | 2 Shipping skid | 3 Chassis |
6.Remove and save (for later use) the screws fastening left and right shipping brackets to the chassis and the skid, as shown in Figure 3‐4 on page 3‐4.
7.Lift and remove the chassis from the skid.
8.Save the plastic bag and skid for future reshipping, if necessary.
Matrix