Enterasys Networks C2G124-48P manual Connectivity, Management, Switch Configuration Using WebView

Connectivity

Connectivity

The switch connects to Ethernet networks or workstations through the fixed front panel RJ45 connectors and four uplink ports that support optional Mini‐GBICs.

At the time of this printing, the six Mini‐GBICs available from Enterasys are described in Table 1‐2 on page 1‐6. These Mini‐GBICs meet or exceed the IEEE 802.3z‐1998 standard.

Table 1-2 Description of Mini-GBICs

Mini-GBIC	Specification
MGBIC-LC01	Provides one 1000BASE-SX compliant LC fiber-optic multimode port and a
	standard LC connector. For optical and operating range specifications, refer to
	“MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on page A-4.
MGBIC-LC03	Provides one 1000BASE-LX compliant LC fiber-optic multimode port with a
	standard LC duplex connector. For optical and operating range specifications,
	refer to “MGBIC-LC03 Specifications (1000BASE-LX)” on page A-4.
MGBIC-LC09	Provides one 1000BASE-LX compliant LC fiber-optic single-mode port with a
	standard LC connector. For optical and operating range specifications, refer to
	“MGBIC-LC09 Specifications (1000BASE-LX)” on page A-5.
MGBIC-MT01	Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a
	standard MT-RJ connector. For optical and operating range specifications,
	refer to “MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on
	page A-4.
MGBIC-08	Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a
	standard LC connector. For optical and operating range specifications, refer to
	“MGBIC-08 Specifications (1000BASE-ELX)” on page A-6.
MGBIC-02	Provides one 1000BASE-T compliant copper port with an RJ45 connector. For
	details, refer to “MGBIC-02 Specifications (1000BASE-T)” on page A-6.

Management

Management of the module can be either in‐band or out‐of‐band. In‐band remote management is possible using Telnet, Enterasys Networks’ NetSight® management application, or the WebView application. Out‐of‐band management is provided through the RJ45 COM (Communication) port on the front panel using a VT100 terminal or a VT100 terminal emulator.

Switch Configuration Using WebView

Enterasys Networks’ HTTP‐based Web management application (WebView) is an intuitive web tool for simple management tasks.

1-6 Introduction