Dialogic® SS7G21 and SS7G22 Signaling Servers Hardware Manual Issue 7
4.2Declarations of the Manufacturer or Importer
The International Declarations of Conformity for Dialogic® SS7G21 and SS7G22 products are copied below, or can be downloaded from: http://www.dialogic.com/declarations/
Declaration of Conformity
No: D0005
Revision 01
The equipment described below is declared to be in conformity with the following applicable national and international standards. The conformity is valid ONLY when the equipment is used in a manner consistent with the manufacturer’s recommendations and the reference documents.
Equipment Type(s): | Signalling Server |
| Dialogic SS7G21 |
Document No / Edition /Date | Title | |
|
| |
IEC | Safety of Information Technology Equipment [CB Certificate issued] | |
UL/CSA | Safety of Information Technology Equipment | |
EN | Safety of Information Technology Equipment | |
|
| |
AS/NZS 60950.1: 2000 | Safety of Information Technology Equipment | |
|
| |
FCC, 47 CFR Part 15, Class A digital device | Radio Frequency Devices - Subpart B - Unintentional Radiators | |
|
| |
|
| |
EN 300 386 V1.3.3 | ERM; Telecommunication Network Equipment; EMC | |
EN 55022: 1998 + A2, Class A Limit | Information Technology Equipment - Radio Disturbance Characteristics | |
|
| |
EN 55024: 1998 + A1 + A2 | Information Technology Equipment - Immunity Characteristics | |
|
| |
EN | EMC – Limits for Harmonic Current Emissions | |
|
| |
EN | EMC – Limitation of Voltage Changes, Fluctuations and Flicker | |
|
| |
CISPR 22 Ed 4.0 | Information Technology Equipment - Radio Disturbance Characteristics | |
Technical Requirements for Connection of Terminal Equipment to the Telephone Network | ||
|
| |
Specification for Terminal Equipment, Terminal Systems, Network Protection Devices. Connection Arrangements | ||
|
| |
ETSI TBR 12 + A1 ed.1 | 2048 kbit/s Digital Unstructured Leased Lines (D2048U): Attachment Requirements for Terminal Equipment I/F | |
|
| |
ETSI TBR 13 ed.1 | 2048 kbit/s Digital Structured Leased Lines (D2048S): Attachment Requirements for Terminal Equipment I/F | |
|
| |
|
| |
Additional information: |
| |
|
| |
Australia test reports : | Nemko test report # 33077 dated | |
Hursley EMC Services test report # 04R256CR dated | ||
| ||
|
| |
Regions: |
|
European Economic Area (EEA) :Dialogic (address below) declares the equipment in compliance with the essential requirements of EC Council Directives : 1999/5/EC - R&TTE : 2006/95/EC - Safety/LVD : 89/336/EEC – EMC
USA : Dialogic (address below) make this SDoC as Responsible Party for the T1 interface board(s) used in this equipment.
The included T1 interface board(s) are registered with ACTA as number : US: ICKCNNANSS7SPCI
Canada : Dialogic (address below) is the Declaring Party for the T1 interface board(s) used in this equipment.
The included T1 interface board(s) are registered with Industry Canada as number : IC:
Australia / New Zealand : Supplier Code
Any other region where the Regulatory Requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued by Dialogic Corporation, which is solely responsible for the declared compliance.
Company Address:
Dialogic Corporation 9800 Cavendish 5th floor Montreal, Quebec Canada, H4M 2V9
Place of Issue:
Dialogic (UK) Limited,
21 Green Lane,
Fordingbridge, Hampshire,
SP6 1HU, UK
Authorized signature, name and function:
John Matthews – Engineering Manager
Date: 02, April, 2007
Dialogic Distribution Limited, our location in Europe operates from:
Unit 4034 Kingswood Avenue Citywest Business Campus, Saggart, Co. Dublin, Ireland.
Copies of this Declaration of Conformity may be downloaded at http://www.dialogic.com/declarations
23