Eaton Electrical Powerware 9315 operation manual Time Setup Screen

Using the Monitor Panel

Select Time from the Setup menu to display the Time Setup screen. The Time Setup screen allows you to set the internal timestamp of the UPS. The timestamp is used for logging events in the Event History Log. Figure 5-9 shows the Time Setup screen.

		Uninterruptible Power System
UPS System Normal					04 NOV 1997	14:23:45
Alarm:	None
Notice: None
Battery
Percent				Set Time & Date
100%
			DAY DT MON YR HR:MN SAVE
			MON 07 APR 97 15:06		YES
Setup
Port 1
Port 2
Time
Meters	Events	Statistics	Graphics	Setup

Figure 5-9. Time Setup Screen

The small return arrow () appears in the upper right corner of the Time Setup screen.

This arrow is a reminder that you can press the button on the Monitor Panel to toggle the buttons between the menu box and the information area. When the scroll bar is in the information area, the return arrow is in the menu box. When the scroll bar is in the menu box, the return arrow is in the information area.

When the scroll bar appears in the information area, you can use the buttons to change the timestamp settings. To change a setting in the timestamp, press the and buttons to highlight the setting you want to change. To increase the setting (make it a higher value), press the button. To decrease the setting (make it a lower value), press the button. If you want to save the settings upon exit from this screen, be sure the SAVE field is set to YES.

EATON Powerware® 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev F powerware.com 5-11