Communication
7.11 Remote Notification
NOTE The
NOTE Refer to the service documentation for detailed Remote Notification information.
For connection and setup of a modem or to enable Remote Notify features within the UPS, please contact Powerware (see page
Remote Notification provides the UPS with the capability to use a standard
Call a remote terminal or pager based on programmable events and alarms.
Four separate, programmable notification groups (phone numbers).
Automatic answering
Remote and local ability to clear Call Out alarms and events.
Error detection and correction for misconfigured and disconnected modems.
Remote Notification provides the user with the option of receiving alarms and notices at a remote location. Using the Terminal mode, the user calls the UPS to perform basic monitoring. In the event of a UPS alarm or notice, the user is notified at the remote location. The UPS calls through the modem to the user’s computer or pager and leaves a message.
Remote Notification is an extension of the Terminal mode with the additional support algorithms necessary to control an external modem. Connection to the UPS is made when a user calls the UPS on the phone. The user has exactly the same capabilities as if using a terminal connected directly to the UPS
Remote Notification differs from the basic Terminal mode with the addition the following functions:
Call Answer – The Call Answer function allows the user to call into the UPS from a remote location and enter Terminal mode.
Call Out – The Call Out function allows the UPS to be configured to call either a remote computer or numeric paging service over the phone line. Call Out allows the UPS to call a remote computer and leave a
Housekeeping – The Housekeeping function maintains the link between the UPS and modem.
EATON Powerware® 9315 UPS |