Loop: PRE AMP (post Distortion, pre Amp Model/Amp Loop send), or POST AMP (Post Amp Model/Amp Loop return). Note that the Stomp Loop button’s LED turns red when it’s pre amp, and green when it’s post amp or post FX.
4.Store these changes using the Store procedure.
Note: If you try to enable the Stomp Loop but nothing is connected to the Stomp Loop jacks,
the Display will briefly read NO loop. The Stomp Loop will not enable when no connections are present at these jacks.
Connection Setups
The RP1000 has many different connection options. Here are some more common ways it can be used:
Mono Amp
Connect your guitar to the RP1000’s Input.
Amp/Mixer switch on 1/4" outputs is set to AMP.
Connect the RP1000’s |
Left (mono) Line Output |
to the amp’s Input. |
9