To bypass amp/cabinet modeling in all presets, press the Amp/Cabinet Bypass button. When it is lit, amp/cabinet modeling is bypassed in all presets.
Amp/Cabinet Bypass can be used in either Preset or Pedalboard mode.
Storing/Copying/Naming a Preset
When you’re done editing a preset, you should store your settings to any of the 100 User preset locations (presets
1.Press the Store button once. The Store button LED blinks and the first character in the Display flashes, indicating that you can now name your custom creation.
2.Use Knob 1 to select the
1. Press Store; characters in Display flash individually
2.Use Knobs to name Preset
3.Once the desired name is shown in the display, press the Store button again to enter the second stage of the storing process. The red Display begins to flash.
4.Select the User preset location where your new sound will reside using the Up and Down Footswitches. The displays show the preset name and User preset number about to be overwritten.
3.Press Store again; Preset number flashes
4. Select destination with UP and DOWN Footswitches
5.Press the Store button again to save the changes.
The procedure for copying one preset to another preset location is the same. Use the Foot- switches to select the preset that you want to copy, then follow steps
16