Boss OC-2 OctaverTM octaver, Delay Knob

Boss® OC-2 OctaverTM (octaver)

Based on the Boss® OC-2 OctaverTM, this adds two signals to your original guitar signal.The first is one octave below your guitar, and the second is two octaves below your guitar. Each additional signal has its own volume control.

Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain.Turn counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post (appears after the Noise Gate effect).

Octave 1- Knob 3 adjusts the the volume of the signal 1 octave below the input signal. Ranges from 0 to 99.

Octave 2 - Knob 4 controls the volume of the signal 2 octaves below the input signal. Ranges 0 to 99.

Dry Level - Knob 6 controls the volume of the dry signal. Ranges from 0 to 99.

Delay

Delay is an effect that records a portion of the incoming signal, and then plays it back a short time later. The recording can repeat just once or several times.

Delay - Knob 1 selects one of the 7 different Delay types. Values include: analog (DigiTech® Analog Delay), dm delay (Based on the Boss DM-2 Analog Delay), digital (DigiTech Digital Delay), modulate (DigiTech Modulated Delay), pingpong (DigiTech Pong Delay), tape (DigiTech Tape Delay), echoplex (Based on the MaestroTM EP-2 Echoplex® Tape Echo), reverse (DigiTech Reverse Delay), lo fi (a Lo Fidelity Delay), and 2 tap (a 2-tap Delay). Press this knob to turn the Delays on and off.

Knobs 2-6have the following functions for the various Delay Effects:

Delay	Knob 2	Knob 3	Knob 4	Knob 5	Knob 6
	(Time)	(Repeats)	(Param. 1)	(Param. 2)	(Delay
					Level)

analog	Time	Repeats	--	Multiplier	Delay Level

dm delay	Repeat Rate	Echo	Intensity	Multiplier	--

digital	Time	Repeats	Ducker	Multiplier	Delay Level
			Threshold

modulate	Time	Repeats	Depth	Multiplier	Delay Level

pingpong	Time	Repeats	Ducker	Multiplier	Delay Level
			Threshold

tape	Time	Repeats	Wow	Multiplier	Delay Level

echoplex	Time	Repeats	--	Multiplier	Volume

reverse	Time	Repeats	--	Multiplier	Delay Mix

LO FI	Time	Repeats	--	Multiplier	Volume

2 tap	Time	Repeats	Tap Ratio	Multiplier	Delay Mix

The Repeats parameter (Knob 3) ranges from 0 to Repeat Hold (Hold) for all delays except the Echoplex®, DM-2, and Lo-Fi. Repeat Hold is one click past 99, and acts as an infinite repeat.

The Multiplier parameter (Knob 5) lets you divide the tap tempo rate into 1/2, 1/4, dotted 1/8, 1/8, and triplet 1/4 note rhythms.