Edimax Technology ES-5224REM, ES-5224RFM, ES-5224RM, ES-3124REM user manual Operating Environment

Page 12

Operating Environment

This management switch must be installed and operated within the limits of the specified operating temperature and humidity (see previous section on Specifications). Do not place objects on top of the unit or obstruct any vents at the sides of the unit. Do not position the unit near any heating source such as heaters, radiators, or direct exposure to sun. Do not expose the unit to water and or moisture. If necessary, use a dehumidifier to reduce humidity.

Connecting to network devices

1.All ports of this switch support the Auto-MDI/MDI-X function. That is to say, you can connect any device (including PC, Switch, Hub) to a port of this switch using a regular cable. The RJ-45 port will auto-detect and auto-switch to the correct MDI/MDI-X mode. (do not need to connect to a specific uplink port or cross-over cable)

2.Connect one end of the network cable to the RJ-45 port on the front panel, and connect the other end of the network cable to the RJ-45 port on the network device. Follow the same procedure to connect all the RJ-45 ports of the switch. Maximum length, using UTP cable, between the switch and connected device is 100 meters (300ft). Once the network cable is connected to both ends and the attached network device is powered on, the LNK/ACT LED should be lit.

3.Make sure the wiring is correct. You need to use Category 3/4/5 cable for 10Mbps operation or Category 5 cable for 100Mbps connections.

Connecting the power

Plug the power cable into the internal three-pronged power plug. Connect it to an electrical outlet then turn on the switch.

12

Image 12

Contents User’s Manual FCC Compliance Statement Content Security ManagerReboot STPGvrp Igmp Lacp 802.1X Default Restart Port Status Port Counters System InformationIntroduction Page Features Expansion Slot Option Fast/Gigabit Ethernet Switch Expansion Slot Option Gigabit Ethernet Switch onlyDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Switch Settings BasicModule Info Miscellaneous Settings AdvancedPage Console Port Information Port Controls Page Aggregator setting TrunkingAggregator Information State Activity Filter Database Igmp SnoopingStatic MAC Address Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Configure port VID settings Port VID PvidIngress Filtering Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Configuration Backup Tftp Restore ConfigurationTftp Backup Configuration Reset System Reboot Console-Menu Line Main Menu Switch Static Configuration ActionsPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Create a Vlan Group Select EditSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode Misc Configuration MAC Age IntervalBroadcast Storm Filtering Max bridge transmit delay bound Port Security Administration Configuration Change UsernameChange Password Device InformationIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address Protocol Related Configuration STPSTP Enable System ConfigurationPerport Configuration Snmp System Options Community Strings Trap Managers Add the trap managerEdit trap manager Delete trap manager 1.Press Delete keyGvrp Igmp Lacp Working Port Setting State Activity Lacp Status 802.1X Configuration Enable 802.1X functionSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Default RestartTftp Update Firmware Update Configure File Page Upload Configure File Power LED is not lit Link LED is not lit when connected to the network deviceContact your dealer if problems persist Collision LED flashes constantly