Edimax Technology ES-3124REM, ES-5224REM, ES-5224RFM, ES-5224RM user manual System Configuration

Page 87

3.6.2 System Configuration

If you enable the IEEE 802.1X function, you can configure the parameters of this function.

1.Radius Server IP: Set the Radius Server IP address

2.Shared Key: Set an encryption key for use during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server.

3.NAS, Identifier: Set the identifier for the radius client.

4.Server Port: Set the UDP destination port for authentication requests to the specified Radius Server.

5.Accounting Port: Set the UDP destination port for accounting requests to the specified Radius Server.

There are four types for each port:

Fu, Force unauthorized: The specified port is required to be held in the Unauthorized state.

Fa, Force authorized: The specified port is required to be held in the Authorized state.

Au, Auto: The specified port is set to the Authorized or Unauthorized state in accordance with the outcome of an authentication exchange between the Supplicant and the authentication server.

No, None: The specified port is required to be held in the Authorized state.

87

Image 87
Contents User’s Manual FCC Compliance Statement Security Manager ContentReboot STPGvrp Igmp Lacp 802.1X Port Status Port Counters System Information Default RestartIntroduction Page Features Operation Temperature 50~131 10~55 Expansion Slot Option Fast/Gigabit Ethernet SwitchExpansion Slot Option Gigabit Ethernet Switch only Dimension 45HPacking list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Switch Settings BasicModule Info Advanced Miscellaneous SettingsPage Console Port Information Port Controls Page Trunking Aggregator settingAggregator Information State Activity Filter Database Igmp SnoopingStatic MAC Address Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Configure port VID settings Port VID PvidIngress Filtering Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Configuration Backup Tftp Restore ConfigurationTftp Backup Configuration Reset System Reboot Console-Menu Line Main Menu Actions Switch Static ConfigurationPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Select Edit Create a Vlan GroupSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode MAC Age Interval Misc ConfigurationBroadcast Storm Filtering Max bridge transmit delay bound Port Security Change Username Administration ConfigurationDevice Information Change PasswordIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address STP Protocol Related ConfigurationSystem Configuration STP EnablePerport Configuration Snmp System Options Community Strings Add the trap manager Trap ManagersDelete trap manager 1.Press Delete key Edit trap managerGvrp Igmp Lacp Working Port Setting State Activity Lacp Status Enable 802.1X function 802.1X ConfigurationSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Restart DefaultTftp Update Firmware Update Configure File Page Upload Configure File Collision LED flashes constantly Power LED is not litLink LED is not lit when connected to the network device Contact your dealer if problems persist