Edimax Technology ES-5224RFM, ES-5224REM, ES-5224RM, ES-3124REM user manual Upload Configure File

Page 97

6.3 Upload Configure File

In this page you can save current EEPROM values to image file. Then go to the update configure page to restore the EEPROM values.

1.Start the TFTP server.

2.Press <Edit> on this page.

3.TFTP Server: Type the IP of TFTP server.

4.Remote File Name: Type the image file name.

5.Press Ctrl+A go to action line.

6.Press <Save> key, it will start to upload the image file.

7.When save successfully, the image file upload finished too.

8.Restart switch.

97

Image 97

Contents User’s Manual FCC Compliance Statement Security Manager ContentSTP RebootGvrp Igmp Lacp 802.1X Port Status Port Counters System Information Default RestartIntroduction Page Features Expansion Slot Option Gigabit Ethernet Switch only Expansion Slot Option Fast/Gigabit Ethernet SwitchDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Basic Switch SettingsModule Info Advanced Miscellaneous SettingsPage Console Port Information Port Controls Page Trunking Aggregator settingAggregator Information State Activity Igmp Snooping Filter DatabaseStatic MAC Address Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Restore Configuration Configuration BackupTftp Backup Configuration Reset System Reboot Console-Menu Line Main Menu Actions Switch Static ConfigurationPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Select Edit Create a Vlan GroupSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode MAC Age Interval Misc ConfigurationBroadcast Storm Filtering Max bridge transmit delay bound Port Security Change Username Administration ConfigurationDevice Information Change PasswordIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address STP Protocol Related ConfigurationSystem Configuration STP EnablePerport Configuration Snmp System Options Community Strings Add the trap manager Trap ManagersDelete trap manager 1.Press Delete key Edit trap managerGvrp Igmp Lacp Working Port Setting State Activity Lacp Status Enable 802.1X function 802.1X ConfigurationSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Restart DefaultTftp Update Firmware Update Configure File Page Upload Configure File Link LED is not lit when connected to the network device Power LED is not litContact your dealer if problems persist Collision LED flashes constantly