Edimax Technology ES-5224REM, ES-5224RFM, ES-5224RM, ES-3124REM Port Configuration, Flow Control

Page 52

2.1 Port Configuration

This page can change the status of each port. Press <Space> key to change configuration of each item.

1.InRate(100K/unit): You can set input rate control, per unit is 100K. The valid range is 0~1000.

0: disable rate control.

1~1000: valid rate value.

2.OutRate(100K/unit): You can set output rate control, per unit is 100K. The valid range is 0~1000.

0: disable rate control.

1~1000: valid rate value.

3.Enable: You can disable or enable this port control. “Yes” means the port is enabled, “No” means the port is disabled.

4.Auto: You can set auto-negotiation mode as Auto, Nway_Force or Force of each port.

5.Spd/Dpx: You can set 100/10Mbps speed on port 1~port24; 1000/100/10Mbps speed on port25~port26 (Gigabit Switch), 100/10Mbps speed on port25~port26 (Fast Ethernet Switch) and set full-duplex or half-duplex mode.

6.Flow Control:

Full: Displays the flow control status is enable/disable in full

52

Image 52

Contents User’s Manual FCC Compliance Statement Content Security ManagerSTP RebootGvrp Igmp Lacp 802.1X Default Restart Port Status Port Counters System InformationIntroduction Page Features Expansion Slot Option Fast/Gigabit Ethernet Switch Expansion Slot Option Gigabit Ethernet Switch onlyDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Basic Switch SettingsModule Info Miscellaneous Settings AdvancedPage Console Port Information Port Controls Page Aggregator setting TrunkingAggregator Information State Activity Igmp Snooping Filter DatabaseStatic MAC Address Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Restore Configuration Configuration BackupTftp Backup Configuration Reset System Reboot Console-Menu Line Main Menu Switch Static Configuration ActionsPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Create a Vlan Group Select EditSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode Misc Configuration MAC Age IntervalBroadcast Storm Filtering Max bridge transmit delay bound Port Security Administration Configuration Change UsernameChange Password Device InformationIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address Protocol Related Configuration STPSTP Enable System ConfigurationPerport Configuration Snmp System Options Community Strings Trap Managers Add the trap managerEdit trap manager Delete trap manager 1.Press Delete keyGvrp Igmp Lacp Working Port Setting State Activity Lacp Status 802.1X Configuration Enable 802.1X functionSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Default RestartTftp Update Firmware Update Configure File Page Upload Configure File Power LED is not lit Link LED is not lit when connected to the network deviceContact your dealer if problems persist Collision LED flashes constantly