Edimax Technology ES-5224RFM, ES-5224REM, ES-5224RM, ES-3124REM user manual Time

Page 37

Parameter

Description

 

 

Priority

You can change priority value, A value used to identify the root bridge. The

bridge with the lowest value has the highest priority and is selected as the

 

root. Enter a number 1 through 65535.

Max Age

You can change Max Age value, The number of seconds a bridge waits

without receiving Spanning-Tree Protocol configuration messages before

 

attempting a reconfiguration. Enter a number 6 through 40.

Hello Time

You can change Hello time value, the number of seconds between the

transmission of Spanning-Tree Protocol configuration messages. Enter a

 

number 1 through 10.

Forward Delay

You can change forward delay time, The number of seconds a port waits

before changing from its Spanning-Tree Protocol learning and listening

Time

states to the forwarding state. Enter a number 4 through 30.

 

 

 

4.The following parameter can be configured on each port, click Apply button to modify.

Parameter

Description

 

 

Port Priority

You can make it more or less likely to become the root port, the rage is

0-255,default setting is 128 the lowest number has the highest priority.

Path Cost

Specifies the path cost of the port that switch uses to determine which port

are the forwarding ports the lowest number is forwarding ports, the rage is

 

1-65535 and default value base on IEEE802.1D

 

10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10

37

Image 37
Contents User’s Manual FCC Compliance Statement Security Manager ContentSTP RebootGvrp Igmp Lacp 802.1X Port Status Port Counters System Information Default RestartIntroduction Page Features Expansion Slot Option Gigabit Ethernet Switch only Expansion Slot Option Fast/Gigabit Ethernet SwitchDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Basic Switch SettingsModule Info Advanced Miscellaneous SettingsPage Console Port Information Port Controls Page Trunking Aggregator settingAggregator Information State Activity Igmp Snooping Filter DatabaseStatic MAC Address Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Restore Configuration Configuration BackupTftp Backup Configuration Reset System Reboot Console-Menu Line Main Menu Actions Switch Static ConfigurationPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Select Edit Create a Vlan GroupSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode MAC Age Interval Misc ConfigurationBroadcast Storm Filtering Max bridge transmit delay bound Port Security Change Username Administration ConfigurationDevice Information Change PasswordIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address STP Protocol Related ConfigurationSystem Configuration STP EnablePerport Configuration Snmp System Options Community Strings Add the trap manager Trap ManagersDelete trap manager 1.Press Delete key Edit trap managerGvrp Igmp Lacp Working Port Setting State Activity Lacp Status Enable 802.1X function 802.1X ConfigurationSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Restart DefaultTftp Update Firmware Update Configure File Page Upload Configure File Link LED is not lit when connected to the network device Power LED is not litContact your dealer if problems persist Collision LED flashes constantly