Edimax Technology ES-3124REM, ES-5224REM, ES-5224RFM, ES-5224RM Max bridge transmit delay bound

Page 63

2.4.3 Max bridge transmit delay bound

1.Max bridge transmit delay bound: Limit the packets queuing time in switch. If enable, the packets queued exceed will be drop. Press Space key to set the time. This valid value are 1sec, 2sec, 4sec and off. Default is off.

2.Low Queue Delay Bound: Limit the low priority packets queuing time in switch. If enable, the low priority packet stays in switch exceed Low Queue Max Delay Time, it will be sent. Press Space key to enable or disable this function.

3.Low Queue Max Delay Time: To set the time that low priority packets queuing in switch. Default Max Delay Time is 255ms. The valid range is 1~255 ms.

NOTE: Make sure of “Max bridge transit delay bound control” is enabled before enable Low Queue Delay Bound, because Low Queue Delay Bound must be work under “Max bridge transit delay bound control” is enabled situation.

63

Image 63

Contents User’s Manual FCC Compliance Statement Security Manager ContentReboot STPGvrp Igmp Lacp 802.1X Port Status Port Counters System Information Default RestartIntroduction Page Features Operation Temperature 50~131 10~55 Expansion Slot Option Fast/Gigabit Ethernet SwitchExpansion Slot Option Gigabit Ethernet Switch only Dimension 45HPacking list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Switch Settings BasicModule Info Advanced Miscellaneous SettingsPage Console Port Information Port Controls Page Trunking Aggregator settingAggregator Information State Activity Filter Database Igmp SnoopingStatic MAC Address Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Configure port VID settings Port VID PvidIngress Filtering Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Configuration Backup Tftp Restore ConfigurationTftp Backup Configuration Reset System Reboot Console-Menu Line Main Menu Actions Switch Static ConfigurationPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Select Edit Create a Vlan GroupSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode MAC Age Interval Misc ConfigurationBroadcast Storm Filtering Max bridge transmit delay bound Port Security Change Username Administration ConfigurationDevice Information Change PasswordIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address STP Protocol Related ConfigurationSystem Configuration STP EnablePerport Configuration Snmp System Options Community Strings Add the trap manager Trap ManagersDelete trap manager 1.Press Delete key Edit trap managerGvrp Igmp Lacp Working Port Setting State Activity Lacp Status Enable 802.1X function 802.1X ConfigurationSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Restart DefaultTftp Update Firmware Update Configure File Page Upload Configure File Collision LED flashes constantly Power LED is not litLink LED is not lit when connected to the network device Contact your dealer if problems persist