disable, the group is local static trunking group.
All ports support LACP dynamic trunking group. If connecting to the device that also supports LACP, the LACP dynamic trunking group will be created automatically.
3.Work ports: Allow max four ports can be aggregated at the same time. If LACP static trunking group, the exceed ports is standby and able to aggregate if work ports fail. If local static trunking group, the number must be as same as the group member ports.
4Select the ports to join the trunking group. Allow max four ports can be aggregated at the same time.
5.If LACP enable, you can configure LACP Active/Passive status in each ports on State Activity page.
6.Click Apply.
4.5.2 Aggregator Information
When you are setting LACP aggregator, you can see relation information here.
1. This page is no group active. LACP don’t working.
2. This page is Static Trunking group.
26