Edimax Technology ES-5224RM, ES-5224REM Power LED is not lit, Collision LED flashes constantly

Page 98

Troubleshooting

1. Power LED is not lit

Check if the power cord is properly connected to the power outlet and the switch. Make sure the power switch at the rear panel is turned ON.

2.Link LED is not lit when connected to the network device

(1)Make sure the power switch of the network device is turned on

(2)Check if the network cable is properly connected to the switch and the network device

(3)Make sure the UTP cables comply with EIA/TIA 568 and Category 5 specification

3.Collision LED flashes constantly

(1)Remove all the network cables; connect the cables back one by one to isolate the source of the collision.

(2)Check the network cable, inferior cable quality will result in excessive collisions and packet errors.

[!] Contact your dealer if problems persist.

98

Image 98

Contents User’s Manual FCC Compliance Statement Content Security ManagerGvrp Igmp Lacp 802.1X RebootSTP Default Restart Port Status Port Counters System InformationIntroduction Page Features Dimension 45H Expansion Slot Option Fast/Gigabit Ethernet SwitchExpansion Slot Option Gigabit Ethernet Switch only Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Module Info Switch SettingsBasic Miscellaneous Settings AdvancedPage Console Port Information Port Controls Page Aggregator setting TrunkingAggregator Information State Activity Static MAC Address Filter DatabaseIgmp Snooping Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Ingress Filtering Configure port VID settingsPort VID Pvid Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Backup Configuration Configuration BackupTftp Restore Configuration Reset System Reboot Console-Menu Line Main Menu Switch Static Configuration ActionsPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Create a Vlan Group Select EditSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode Misc Configuration MAC Age IntervalBroadcast Storm Filtering Max bridge transmit delay bound Port Security Administration Configuration Change UsernameChange Password Device InformationIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address Protocol Related Configuration STPSTP Enable System ConfigurationPerport Configuration Snmp System Options Community Strings Trap Managers Add the trap managerEdit trap manager Delete trap manager 1.Press Delete keyGvrp Igmp Lacp Working Port Setting State Activity Lacp Status 802.1X Configuration Enable 802.1X functionSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Default RestartTftp Update Firmware Update Configure File Page Upload Configure File Contact your dealer if problems persist Power LED is not litLink LED is not lit when connected to the network device Collision LED flashes constantly