Edimax Technology ES-5224REM, ES-5224RFM, ES-5224RM Port Mirroring Configuration, Select Edit

Page 68

2.6 Port Mirroring Configuration

The port mirroring is a method for monitor traffic in switched networks. Traffic through ports can be monitored by one specific port. That is, traffic goes in or out monitored ports will be duplicated into monitoring port.

Press Space key to change configure of each item.

1.Select <Edit>.

2.Sniffer Mode: Press Space key to set sniffer mode: Disable\Rx\Tx\Both.

3.Monitoring Port: It means sniffer port can be used to see all monitor port traffic. Press Space key to choose it.

4.Monitored Port: The ports you want to monitor. All monitor port traffic will be copied to sinffer port. You can select max 25 monitor ports in the switch. You can choose which port want to be monitored in only one sniffer mode.

Press Space key to choose member port, “V” – is the member,

“—“ – not the member.

5.Press Ctrl+A go back action menu line

6.Select <Save> to save all configure value.

7.On the action menu line you can press <Next Page> to configure port9 ~ port26, press <Previous Page> return to last page.

NOTE: Only have one sniffer mode in this switch at the same

time.

68

Image 68
Contents User’s Manual FCC Compliance Statement Content Security ManagerGvrp Igmp Lacp 802.1X RebootSTP Default Restart Port Status Port Counters System InformationIntroduction Page Features Expansion Slot Option Fast/Gigabit Ethernet Switch Expansion Slot Option Gigabit Ethernet Switch onlyDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Module Info Switch SettingsBasic Miscellaneous Settings AdvancedPage Console Port Information Port Controls Page Aggregator setting TrunkingAggregator Information State Activity Static MAC Address Filter DatabaseIgmp Snooping Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Ingress Filtering Configure port VID settingsPort VID Pvid Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Backup Configuration Configuration BackupTftp Restore Configuration Reset System Reboot Console-Menu Line Main Menu Switch Static Configuration ActionsPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Create a Vlan Group Select EditSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode Misc Configuration MAC Age IntervalBroadcast Storm Filtering Max bridge transmit delay bound Port Security Administration Configuration Change UsernameChange Password Device InformationIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address Protocol Related Configuration STPSTP Enable System ConfigurationPerport Configuration Snmp System Options Community Strings Trap Managers Add the trap managerEdit trap manager Delete trap manager 1.Press Delete keyGvrp Igmp Lacp Working Port Setting State Activity Lacp Status 802.1X Configuration Enable 802.1X functionSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Default RestartTftp Update Firmware Update Configure File Page Upload Configure File Power LED is not lit Link LED is not lit when connected to the network deviceContact your dealer if problems persist Collision LED flashes constantly