Edimax Technology ES-3124REM Configure port VID settings, Port VID Pvid, Ingress Filtering

Page 35

Port VID

Configure port VID settings

From the main Tag-based (IEEE 802.1Q) VLAN page, click Port VID Settings.

Port VID (PVID)

Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for accommodating devices that you want to participate in the VLAN but that don’t support tagging. Each port of this switch allows user to set one PVID, the range is 1~255, default PVID is 1. The PVID must be the same as the VLAN ID the port belongs to, or the untagged traffic will be dropped.

Ingress Filtering

Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the port belongs to that VLAN. This switch have two ingress filtering rule as follows:

Ingress Filtering Rule 1: Forward only packets with VID matching this port's configured VID.

Ingress Filtering Rule 2: Drop Untagged Frame.

35

Image 35
Contents User’s Manual FCC Compliance Statement Security Manager ContentGvrp Igmp Lacp 802.1X RebootSTP Port Status Port Counters System Information Default RestartIntroduction Page Features Operation Temperature 50~131 10~55 Expansion Slot Option Fast/Gigabit Ethernet SwitchExpansion Slot Option Gigabit Ethernet Switch only Dimension 45HPacking list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Module Info Switch SettingsBasic Advanced Miscellaneous SettingsPage Console Port Information Port Controls Page Trunking Aggregator settingAggregator Information State Activity Static MAC Address Filter DatabaseIgmp Snooping Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Ingress Filtering Configure port VID settingsPort VID Pvid Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Backup Configuration Configuration BackupTftp Restore Configuration Reset System Reboot Console-Menu Line Main Menu Actions Switch Static ConfigurationPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Select Edit Create a Vlan GroupSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode MAC Age Interval Misc ConfigurationBroadcast Storm Filtering Max bridge transmit delay bound Port Security Change Username Administration ConfigurationDevice Information Change PasswordIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address STP Protocol Related ConfigurationSystem Configuration STP EnablePerport Configuration Snmp System Options Community Strings Add the trap manager Trap ManagersDelete trap manager 1.Press Delete key Edit trap managerGvrp Igmp Lacp Working Port Setting State Activity Lacp Status Enable 802.1X function 802.1X ConfigurationSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Restart DefaultTftp Update Firmware Update Configure File Page Upload Configure File Collision LED flashes constantly Power LED is not litLink LED is not lit when connected to the network device Contact your dealer if problems persist