Edimax Technology ES-5224RFM, ES-5224REM, ES-5224RM, ES-3124REM user manual

Page 29

Steps to add Static MAC Address:

1.From the main menu, click administrator->Filter Database ->Static MAC Address.

2.In the MAC address box, enter the MAC address to and from which the port should permanently forward traffic, regardless of the device’s network activity.

4.In the Port Number box, enter a port number.

5.If tag-based (IEEE 802.1Q) VLANs are set up on the switch, static addresses are associated with individual VLANs. Type the VID (tag-based VLANs) to associate with the MAC address.

6.Click add.

Image 29

Contents User’s Manual FCC Compliance Statement Security Manager ContentGvrp Igmp Lacp 802.1X RebootSTP Port Status Port Counters System Information Default RestartIntroduction Page Features Expansion Slot Option Gigabit Ethernet Switch only Expansion Slot Option Fast/Gigabit Ethernet SwitchDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Module Info Switch SettingsBasic Advanced Miscellaneous SettingsPage Console Port Information Port Controls Page Trunking Aggregator settingAggregator Information State Activity Static MAC Address Filter DatabaseIgmp Snooping Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Ingress Filtering Configure port VID settingsPort VID Pvid Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Backup Configuration Configuration BackupTftp Restore Configuration Reset System Reboot Console-Menu Line Main Menu Actions Switch Static ConfigurationPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Select Edit Create a Vlan GroupSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode MAC Age Interval Misc ConfigurationBroadcast Storm Filtering Max bridge transmit delay bound Port Security Change Username Administration ConfigurationDevice Information Change PasswordIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address STP Protocol Related ConfigurationSystem Configuration STP EnablePerport Configuration Snmp System Options Community Strings Add the trap manager Trap ManagersDelete trap manager 1.Press Delete key Edit trap managerGvrp Igmp Lacp Working Port Setting State Activity Lacp Status Enable 802.1X function 802.1X ConfigurationSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Restart DefaultTftp Update Firmware Update Configure File Page Upload Configure File Link LED is not lit when connected to the network device Power LED is not litContact your dealer if problems persist Collision LED flashes constantly