Edimax Technology ES-5224REM, ES-5224RFM, ES-5224RM, ES-3124REM Advanced, Miscellaneous Settings

Page 20

4.2.3 Advanced

Miscellaneous Settings:

MAC Address Age-out Time: Type the number of seconds that an inactive MAC address remains in the switch's address table. The valid range is 300~765 seconds. Default is 300 seconds.

Max bridge transit delay bound control: Limit the packets queuing time in switch. If enable, the packets queued exceed the time will be droped. This valid value are 1sec, 2 sec, 4 sec and off. Default is 1 second.

Broadcast Storm Filter Mode: To configure broadcast storm control, enable it and set the upper threshold for individual ports. The threshold is the percentage of the port's total bandwidth used by broadcast traffic. When broadcast traffic for a port rises above the threshold you set, broadcast storm control becomes active. The valid threshold value are 5%, 10%, 15%, 20%, 25% and off.

Priority Queue Service settings:

First Come First Service: The sequence of packets sent is depend on arrive order.

All High before Low: The high priority packets sent before low priority packets.

WRR: Weighted Round Robin. Select the preference given to packets in the switch's high-priority queue. These options represent the number of high priority packets sent before one low priority packet is sent. For example, 2 High : 1 Low means

20

Image 20

Contents User’s Manual FCC Compliance Statement Content Security ManagerGvrp Igmp Lacp 802.1X RebootSTP Default Restart Port Status Port Counters System InformationIntroduction Page Features Expansion Slot Option Fast/Gigabit Ethernet Switch Expansion Slot Option Gigabit Ethernet Switch onlyDimension 45H Operation Temperature 50~131 10~55Packing list LED indicators Operating Environment Web Management Function Page Flow Control Page Port Statistics IP Address Module Info Switch SettingsBasic Miscellaneous Settings AdvancedPage Console Port Information Port Controls Page Aggregator setting TrunkingAggregator Information State Activity Static MAC Address Filter DatabaseIgmp Snooping Page MAC Filtering Vlan Configuration Port-based Vlan 2 802.1Q Vlan Create a Vlan and add tagged member ports to it Ingress Filtering Configure port VID settingsPort VID Pvid Spanning Tree Time Port Sniffer Snmp Trap Manager Security Manager 12 802.1X Configuration Page Page Tftp Update Firmware Tftp Backup Configuration Configuration BackupTftp Restore Configuration Reset System Reboot Console-Menu Line Main Menu Switch Static Configuration ActionsPort Configuration Page Trunk Configuration Vlan Configure Pvid Port VID 1~255 Type the Pvid Create a Vlan Group Select EditSelect Edit Edit / Delete a Vlan Group Groups Sorted Mode Misc Configuration MAC Age IntervalBroadcast Storm Filtering Max bridge transmit delay bound Port Security Administration Configuration Change UsernameChange Password Device InformationIP Configuration Port Mirroring Configuration Priority Configuration MAC Address Configuration Filtering MAC Address Protocol Related Configuration STPSTP Enable System ConfigurationPerport Configuration Snmp System Options Community Strings Trap Managers Add the trap managerEdit trap manager Delete trap manager 1.Press Delete keyGvrp Igmp Lacp Working Port Setting State Activity Lacp Status 802.1X Configuration Enable 802.1X functionSystem Configuration Misc Configuration Status and Counters Port Status Port Counters System Information Default RestartTftp Update Firmware Update Configure File Page Upload Configure File Power LED is not lit Link LED is not lit when connected to the network deviceContact your dealer if problems persist Collision LED flashes constantly