Visioneer 400 manual Configuring the Onetouch Buttons, Changing a Button setting

41VISIONEER STROBE 400 SCANNER USER’S GUIDE

CONFIGURING THE ONETOUCH BUTTONS

When you installed the scanner, the software configured each OneTouch button with appropriate settings consisting of: a Destination Application, a Scan Configuration, and a File Format.

1.Click on the OneTouch icon.

2.Right-click a button on the OneTouch Button Panel.

3.The OneTouch Properties window opens.

OneTouch Icon

Right-click on a button (for example, the Scan button) and the Properties window opens for that button.

The OneTouch Properties window will also open when you press, hold down for 2 seconds, and release the Scan or Custom button.

Note: Some of the options on the OneTouch Properties Window are “grayed out” and are not available, these options are not appropriate for your scanner model.

Changing a Button setting:

1.Click on an application name in the Select Destination list.

2.Select a file format in the Select Format panel.

3.Select a scanning configuration in the Select Configuration list.

4.Click on OK to save the changes.

5.Place a page in the scanner.

6.Click on the button that you made the changes for.

7.The scanner starts scanning and sends the image to the application, with the file format and scanning configuration you specified.

Note: The next section contains detailed information on making changes to the OneTouch Properties window.