Visioneer manual Visioneer Strobe 400 Scanner USER’S Guide

21VISIONEER STROBE 400 SCANNER USER’S GUIDE

4.A Calibration window opens on-screen after Windows finishes detecting the scanner. Insert the calibration page into the scanner in the direction shown on the calibration page itself.

Depending on the version of Windows you are using, you may be prompted to click Next to proceed with calibration, and click Finish when calibration is complete. Follow the instructions if you see these on-screen prompts.

5.When you’re certain that the software has completely loaded, return to the “Complete the installation by connecting your hardware” window.

6.Click OK.

You can also click More to see a quick overview about accessing and navigating the OneTouch Button Panel. When you’re finished reading the additional information, click OK.

7.Click Close on the Driver Installation Complete window to close and exit the driver installer.