51VISIONEER STROBE 400 SCANNER USER’S GUIDE
2.Select the scan configuration you want to edit or delete.
Select the scan configuration to edit or delete. It must be unlocked, as indicated by not having a lock displayed here.
•To delete the configuration, click the Delete button.
•To edit the configuration, click the Edit button. Edit the settings and click OK.
3.Click OK to close the OneTouch Properties window.
CONFIGURE BEFORE SCAN
You can set up the scanner so that, when you press a button or click it on the Button Panel, a different scanning interface opens before the scanning starts. To set up the scanner for this capability, you select Configure Before Scan from the scan configuration list.
Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when you press a button. You can then use the interface to change the Resolution, Scan Mode, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the OneTouch Properties window for that button.
To set Configure Before Scan:
1.Open the OneTouch Properties window.
