Visioneer 400 manual To Scan Using Configure Before Scan

SCANNING FROM ONETOUCH 52

2.Select the scan configuration Configure Before Scan.

Select then right- click on Configure Before Scan to get the menu, and choose the interface to use for scanning.

3.Right-click on Configure Before Scan and choose an interface to use for configuring before scanning.

TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. Refer to the chapter Scanning from TWAIN.

WIA—The Windows Image Acquisition (WIA) Interface opens for you to make changes prior to scanning. Refer to the chapter Scanning from WIA

4.Click OK or Apply on the OneTouch Properties window.

To Scan Using Configure Before Scan

1.Click the button you set up to use Configure Before Scan.

2.The TWAIN Interface opens.

3.Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White, Resolution in DPI, and Page Size.

4.Click the Scan button on the TWAIN Interface.