Cypress CY8C22113, CY8C22213 manual Bwoa

CY8C22x13 Final Data Sheet						3. Electrical Specifications
Table 3-18. 3.3V AC Operational Amplifier Specifications
Symbol	Description	Min	Typ	Max	Units	Notes
TROA	Rising Settling Time from 80% of ∆V to 0.1% of ∆V (10 pF					Specification maximums for low power and
	load, Unity Gain)					high opamp bias, medium power, and
	Power = Low	–	–	3.92	∝s	medium power and high opamp bias levels
						are between low and high power levels.
	Power = Low, Opamp Bias = High	–			∝s
	Power = Medium	–			∝s
	Power = Medium, Opamp Bias = High	–	–	0.72	∝s
	Power = High (3.3 Volt High Bias Operation not supported)	–	–	–	∝s
	Power = High, Opamp Bias = High (3.3 Volt High Power,				∝s
	High Opamp Bias not supported)	–	–	–
TSOA	Falling Settling Time from 20% of ∆V to 0.1% of ∆V (10 pF					Specification maximums for low power and
	load, Unity Gain)					high opamp bias, medium power, and
	Power = Low	–	–	5.41	∝s	medium power and high opamp bias levels
						are between low and high power levels.
	Power = Low, Opamp Bias = High	–			∝s
	Power = Medium	–			∝s
	Power = Medium, Opamp Bias = High	–	–	0.72	∝s
	Power = High (3.3 Volt High Bias Operation not supported)	–	–	–	∝s
	Power = High, Opamp Bias = High (3.3 Volt High Power,				∝s
	High Opamp Bias not supported)	–	–	–
SRROA	Rising Slew Rate (20% to 80%)(10 pF load, Unity Gain)					Specification minimums for low power and
	Power = Low	0.31	–		V/∝s	high opamp bias, medium power, and
						medium power and high opamp bias levels
	Power = Low, Opamp Bias = High				V/∝s
						are between low and high power levels.
	Power = Medium				V/∝s
	Power = Medium, Opamp Bias = High	2.7	–		V/∝s
	Power = High (3.3 Volt High Bias Operation not supported)	–	–	–	V/∝s
	Power = High, Opamp Bias = High (3.3 Volt High Power,				V/∝s
	High Opamp Bias not supported)	–	–	–
SRFOA	Falling Slew Rate (20% to 80%)(10 pF load, Unity Gain)					Specification minimums for low power and
	Power = Low	0.24	–		V/∝s	high opamp bias, medium power, and
						medium power and high opamp bias levels
	Power = Low, Opamp Bias = High				V/∝s
						are between low and high power levels.
	Power = Medium				V/∝s
	Power = Medium, Opamp Bias = High	1.8	–		V/∝s
	Power = High (3.3 Volt High Bias Operation not supported)	–	–	–	V/∝s
	Power = High, Opamp Bias = High (3.3 Volt High Power,				V/∝s
	High Opamp Bias not supported)	–	–	–
BWOA	Gain Bandwidth Product					Specification minimums for low power and
	Power = Low	0.67	–		MHz	high opamp bias, medium power, and
						medium power and high opamp bias levels
	Power = Low, Opamp Bias = High				MHz
						are between low and high power levels.
	Power = Medium				MHz
	Power = Medium, Opamp Bias = High	2.8	–		MHz
	Power = High (3.3 Volt High Bias Operation not supported)	–	–	–	MHz
	Power = High, Opamp Bias = High (3.3 Volt High Power,	–	–	–	MHz
	High Opamp Bias not supported)
ENOA	Noise at 1 kHz (Power = Medium, Opamp Bias = High)	–	200	–	nV/rt-Hz

June 3, 2004 Document No. 38-12009 Rev. *E 26

[+] Feedback