Setting Acoustic Features (ADJUST MODE)
Selecting adjust mode settings
Adjust the settings to suit your sound system.
1.Press the [ADJUST] button to enter the AD-
JUST MODE.
2.Press the [
] or [
] [DISP] button to select item to set.
Each time the [
] or [
] [DISP] button is pressed, the indications change as shown below.
Adjust the contrast
(CONTRAST)
Set speaker to on or off
)
Set speaker filter frequency
(FILTER 
)
Adjust speaker output level
)
Set speaker delay time
(DELAY 
)
Set Dolby digital
(Dolby D 
)
Set Dolby Pro Logic II
(PL II CNT 
)
•This function is only available Dolby PL II’s music mode selected in Dolby D function.
Set parametric equalizer
(P.EQ 
)
Adjust the RCA input sensitivity
(RCA SENS)
Press the [ADJUST] button to return to the
original mode.
3.When an 
is displayed at the end of a set- ting, press the [ENT] button to enter the ad- just mode.
•When no 
appears at the end of a menu item, the display will return to the setting contents after two seconds.
4.Press the [
] or [
] [VOL] button to adjust the value.
5.Press the [ADJUST] button to return to the original mode.
Adjusting contrast (CONTRAST)
This function is used to adjust display contrast.
•The initial value is [CNTRST.4].
1.Press the [ADJUST] button to enter the AD-
JUST MODE.
2.Press the [
] or [
] [DISP] button to show the [CONTRAST] display.
3.Press the [
] or [
] [VOL] button to adjust the contrast from [CNTRST.1] to [CNTRST.7].
4.Press the [ADJUST] button to return to the original mode.
•The adjustment range is [CNTRST.1] to [CNTRST.7].
Turning speakers on or off (SP-SEL)
The center speaker, rear (surround) speakers and sub woofer have to be set to on or off to achieve maximum sound quality.
•The initial setting is [ON].
1.Press the [ADJUST] button to enter the AD-
JUST MODE.
2.Press the [
] or [
] [DISP] button to change to the 
] display.
3.Press the [ENT] button to display the adjust- ment item.
Press the [
] or [
] [DISP] button to select
•
•
•
4.Press the [
] or [
] [VOL] button to select [ON] or [OFF].
•ON: Speaker installed
•OFF: Speaker not installed
•When a sub woofer is used, set [ON+],
DVC920 9
9 | 2/22/02, 2:06 PM |