Setting Acoustic Features (ADJUST MODE)
4.Press the [
] or [
] [DISP] button to select the speaker to adjust.
•
•
5.Press the [
] or [
] [VOL] button to adjust the delay time.
•The
•The
•Holding down the [
] or [
] [VOL] button to increase or decrease the value in a fast forwarding way.
6.Press the [ADJUST] button to return to the original mode.
Setting the Dolby digital functions (Dolby D)
The Dolby digital functions consist of the Dolby Pro Logic II on/off function and dynamic range compression switching.
●Dolby Pro Logic II:
Dolby Pro Logic II is a matrix decoding technol- ogy in which the updated digital matrix technol- ogy is applied and Dolby pro Logic is further im- proved. It realizes excellent 5.1 channel repro- duction of Dolby surround source as well as ste- reo sound sources such as CDs, thereby caus- ing a surround channel to be
Note:
•The Dolby Pro Logic II function sound effects are only supported for stereo signals.
•This function is not available when center and rear (surround) speaker were turned off in the section “Turning speakers on or off”.
●Dynamic range compression function (D-RANGE):
This function compresses the dynamic range of Dolby digital to maintain low level sounds such as actor conversation and suppress loud sound volumes.
These functions are only available on Dolby digi- tal DVD discs.
1.Press the [ADJUST] button to enter the AD-
JUST MODE.
2.Press the [
] or [
] [DISP] button to change to the [Dolby D 
] display.
3.Press the [ENT] button to display the [D- RANGE].
4.Press the [
] or [
] [DISP] button to select
5.Press the [
] or [
] [VOL] button to select the adjustment value.
•In
•The initial value is [MAX].
•MAX: maximum dynamic range mode of the original source
•STD: recommended mode for standard lis- tening
•MIN: the most compressed dynamic range mode that renders even low sounds easy to hear.
•This button is used to turn [Dolby PL II] mode [MUSIC], [MATRIX], [MOVIE], [VIR- TUAL] and [OFF].
•The initial setting is [OFF].
•MUSIC MODE: appropriate for CDs and other stereo audio.
•MATRIX MODE: appropriate for AM/FM radio audio sources.
•MOVIE MODE: appropriate for audio sources such as movies.
•VIRTUAL MODE: appropriate for audio sources such as movies.
Notes:
•When Dolby Pro Logic II is selected, the sound volume decreases due to the inherent response characteristics of the Dolby Pro Logic II system. As a result, the user should lower the sound vol- ume before switching the Dolby Pro Logic II func- tion [OFF].
•The Dolby Pro Logic II mode cannot be selected when center speaker and rear speakers have been set to [OFF] with the “Turnig speakers on or off
6.Press the [ADJUST] button to return to the original mode.
DVC920 11
11 | 2/22/02, 2:06 PM |