Quick Start Guide
Unpacking and Inspection
Unpacking and Inspection
WARNING! OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES.
1.Inspect containers for damage during shipment. Report any damage to the freight carrier for possible insurance claims.
2.Compare packing list with office records. Report any discrepancies to the office.
3.Open shipping containers, be careful not to damage contents.
4.Inspect contents and report any damage.
5.If equipment must be returned for any reason, carefully repack equipment in the original shipping container with original packing materials if possible.
6.If equipment is to be installed later, replace equipment in original shipping container and store in a safe place until ready to install.
Electrostatic Discharge (ESD) Precautions
ESD can damage processors, circuit cards, and other electronic components. Always observe the following precautions before installing a system component.
1.Do not remove a component from its protective packaging until ready to install it.
2.Wear a wrist grounding strap and attach it to a metal part of the system unit
before handling components. If a wrist strap is not available, maintain contact with the system unit throughout any procedure requiring ESD protection.
WARNING! INTEGRATED CIRCUITS (ICS) ARE EXTREMELY SUSCEPTIBLE TO ELECTROSTATIC DISCHARGE. UNLESS YOU ARE A QUALIFIED SERVICE TECHNICIAN WHO USES TOOLS AND TECHNIQUES THAT CONFORM TO ACCEPTED INDUSTRY PRACTICES, DO NOT HANDLE ICS.
The ESD warning label appears on packages and storage bags that contain
4 | Adit 3500 - Release 1.6 |