PROGRAMMED EDIT RECORDING
In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.
The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.
1Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out from the unit.
2Press CD and load the disc(s).
3Press CD EDIT/CHECK twice.
“EDIT” and “PRGM” are displayed.
•When “AI” is displayed, press CD EDIT/CHECK again.
4Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
•The f, gor MULTI JOG are also available to designate the tape length.
Tape length | Tape side A (front side) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum recording time for side A
5Press DISC DIRECT PLAY
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and 0.
|
|
| Remaining time | Programmed | |
Selected track number | on side A | tracks | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Program number
6Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time cannot be programmed.
7Press CD EDIT/CHECK to select side B and
program the tracks for side B.
After confirming “B” on the display, repeat step 5.
Tape side B (reverse side)
8Press wREC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK to select side A or B, and press f or g repeatedly.
|
|
|
|
|
| Programmed track | ||
Disc number Track number | numbers | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tape side | Program number |
To change the program of each side
Press CD EDIT/CHECK to select side A or B, and press s CLEAR to clear the program on the selected side. Then program tracks again.
To clear the edit program
Press sCLEAR twice so that “EDIT” disappears on the display.
•Up to 30 tracks can be programmed from any of the inserted discs.
•“FULL” is displayed if you attempt to program more than 30 tracks.
•Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.