Aiwa CX-NHMT75 manual Microphone Mixing, Vocal FADER/MULTIPLEX Functions, Karaoke Dolby PRO Logic

Page 23

KARAOKE

MICROPHONE MIXING

Two microphones (not supplied) can be connected to this unit, allowing you to sing along to music sources.

Use microphones with standard plugs (ø6.3 mm, 1/4 inch).

1Connect your microphones to MIC 1 and MIC 2 jacks.

2Press one of the function buttons to select the source to be mixed, and play the source.

3Adjust the volume and tone of the source.

4Press MIC and turn VOLUME within 4 seconds to

adjust the microphone volume.

The microphone volume can be selected from 1 to MAX (7) or OFF (cancel).

The volume of both microphones is adjusted simultaneously.

5Press ECHO and turn VOLUME within 4 seconds

to adjust the echo level.

The echo level can be selected from 1 to MAX (7) or OFF (cancel).

To change the delay time of echo

Hold down ECHO while the echo is on.

“L” (Long) and “M” (Middle) are displayed alternately. At the desired position, release the button.

To record microphone sound mixed with source sound

Follow the procedure for recording from the sound source (see page 17).

SYNC DUB cannot be used for mixing recording.

When not using the microphones

Set the microphone volume and echo level to OFF and remove the microphones from MIC jacks.

•When the ECHO level is changed, the DSP SURROUND mode and the DOLBY PRO LOGIC are automatically canceled.

•When the MIC or ECHO is turned on while the 5.1 CH (page

29)is selected, the 5.1 CH is changed to VIDEO.

•If a microphone is held too near the speakers, a howling sound may be produced. In this case, hold the microphone away from the speakers, or decrease the microphone volume.

•If sound through the microphone is extremely loud, it may be distorted. In this case, decrease the microphone volume.

•When the function is changed, the microphone volume and the echo volume are set to off.

Recommended microphones

The use of unidirectional type microphones is recommended to prevent howling. Contact your local Aiwa dealer for details.

VOCAL FADER/MULTIPLEX FUNCTIONS

This unit can use discs or tapes as Karaoke sources. Use the vocal fader function for ordinary discs or tapes. Use the multiplex function for multi audio discs or tapes.

Press KARAOKE repeatedly to select the vocal fader or multiplex function.

Each time KARAOKE is pressed, one of these functions is selected cyclically.

1 Vocal Fader

The singer’s voice becomes softer than the accompaniment.

2 Auto Vocal Fader

The singer’s voice becomes softer only while there is audio input through a microphone.

3Multiplex

Only the sound on the left channel is heard from both speakers, and the sound on the right channel is muted.

4Auto Multiplex

The sound on the left channel is heard from both speakers, and the sound on the right channel is muted only while there is audio input through a microphone.

5Cancel

To change the time lag setting in Auto Vocal Fader or Auto Multiplex function

The muted singer’s voice can be restored faster.

When Auto Vocal Fader or Auto Multiplex is selected, “A-VF” or “A-MPX” is displayed for 3 seconds and changes to the selected function name. After the selected function name is displayed, keep pressing KARAOKE until FAST is displayed.

To return to the initial setting, select SLOW. When the power is turned off, SLOW is restored.

To change the audible channel in Multiplex function

When Multiplex is selected, “MPX -L” is displayed for 3 seconds and changes to the selected function name. After the selected function name is displayed, keep pressing KARAOKE until MPX- R is displayed.

To return to the initial setting, select MPX-L. When the power is turned off, MPX-L is restored.

•The Karaoke functions may not operate correctly with the following kinds of CDs or tapes.

-Those with monaural sound

-Those recorded with strong echoes

-Those with the vocal part recorded on the right or left side of the sound width

•While the Karaoke function is on, the sound is output as monaural.

•When the function is changed, the Karaoke function is canceled.

KARAOKE DOLBY PRO LOGIC

En

ENGLISH 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CX-NHMT75 Electric Power PrecautionsInstallation Table of Contents 3Connect the surround speakers Connections1Connect the right speaker to the main unit 2Connect the left speaker to the main unitPositioning the Speakers Connecting AN Outdoor Antenna Remote ControlFlash Window Setting Power Economizing ModeDimmer Mode Before OperationPress Enter or a Setting the ClockPress Clock Super T-BASS System Audio AdjustmentsVolume BBE SystemPress GEQ, followed by Enter within 4 seconds Setting a NEW Equalization Curve ManuallyGraphic Equalizer Selecting the Programmed Equalization CurveWithin 8 seconds, press Enter Selecting a Programmed DSP Surround ModeDSP Surround Storing the NEW Equalization CurvesPreset Number Tuning Manual TuningPresetting Stations Press d to start play Basic OperationsAbout cassette tapes Continuous PlayMusic Sensor Playback Loading DiscsPlaying Discs Blank Skip Play Programmed PlayRANDOM/REPEAT Play Recording CD Playing Basic RecordingInserting Blank Spaces To stop dubbing Dubbing a Tape ManuallyPress TAPE/DECK 1/2 to select deck Press Sync DUB once or twice to start recordingPress w REC/REC Mute to start recording on AI Edit RecordingInsert the tape into deck Press CD and load the discs Press CD EDIT/CHECK onceTo change the program of each side Press CD and load the discs Press CD EDIT/CHECK twiceRepeat for the rest of the tracks for side Press wREC/REC Mute to start recordingPRO Press Dolby PRO Logic Additional Dolby PRO Logic ModesPress VIDEO/AUX/5.1CH and start playback Video source Karaoke Dolby PRO Logic Microphone MixingVocal FADER/MULTIPLEX Functions Repeat to reserve other tracks Press d to start play Karaoke ProgramTo cancel the sleep timer Setting the Sleep TimerSetting the Timer To check the time remaining until the power is turned offPrepare the source Timer RecordingAdjust the volume Press Power to turn off the powerPress s twice to stop the remaining two numbers Other Features TimerPress s once CD Digital OUT Optical Jack VIDEO/AUX JacksMD Jacks Line OUT JacksThis unit’s jack DVD player’s jack Connecting a DVD PlayerListening to Dolby Digital Surround Sound Cassette Deck Section Care and MaintenanceGeneral Tuner SectionCopyright SpecificationsDolby PRO Logic Parts Index Energía eléctrica PrecaucionesAdvertencia InstalaciónIndice 3Conecte los altavoces de sonido ambiental Conexiones1Conecte el altavoz derecho a la unidad principal 2Conecte el altavoz izquierdo a la unidad principalNSX-HMT76 Ubicacion DE LOS AltavocesConexion DE UNA Antena Exterior Control RemotoVentanilla Parpadeante Antes DE LA OperacionActivacion DEL Modo DE Ahorro DE Energia Modo DE Intensidad DE IluminacionPara cambiar al modo de 24 horas Pulse ClockPulse Enter o a Para reponer el ajuste original del relojSistema Super T-BASS Control DE VolumenAjustes DE Audio Sistema BBEPulse GEQ, seguido de Enter antes de que Pasen 4 segundos Ecualizador GraficoSeleccion DE LA Curva DE Ecualizacion Programada Ajuste Manual DE UNA Curva DE Ecualizacion NuevaPulse Enter antes de que pasen 8 segundos Almacenamiento DE Curvas DE Ecualizacion NuevasSeleccion DE UN Modo DSP Surround Programado Pulse fDOWN o gUP para seleccionar una Emisora Sintonizacion ManualPreajuste DE Emisoras Sintonizacion Mediante Numero DE PreajusteCintas Operaciones BasicasRadiolade RecepcionAcerca de las cintas de casete Reproduccion ContinuaSensor Musical Compactosdiscos Dereproduccion Introduccion DE DiscosReproduccion DE Discos Cintasde ReproduccionPulse Prgm dos veces en el modo de parada Reproduccion ALEATORIA/ Repeticion DE ReproduccionReproduccion CON Salto DE Secciones EN Blanco Pulse CD Blank SkipGrabacion Reproduccion DE Discos Compactos Grabacion BasicaInsercion DE Espacios SIN Grabar Para detener el copiado Pulse TAPE/DECK 1/2 para seleccionar la platinaPulse una o dos veces Sync DUB para iniciar la grabación De la primera cara Grabacion CON Edicion AIInserte la cinta en la platina Pulse wREC/REC Mute para iniciar la grabaciónPara cambiar el programa de cada cara Grabacion CON Edicion ProgramadaLogic Para cambiar los niveles de sonido durante la reproducción Para cancelar el modo Dolby Pro LogicOtros Modos Dolby PRO Logic Pulse Dolby PRO LogicFunciones DE Desvanecimiento DE VOZ/MULTIPLEX Mezcla MicrofonicaPrograma DE Karaoke Por el temporizador Para cancelar el temporizador para dormirPrepare la fuente Ajuste el volumenPulse Power para desconectar la alimentación Grabacion CON TemporizadorPulse dos veces spara detener los dos números Restantes Otras CaracteristicasOtras Caracteristicas Temporizador Pulse una vez sToma CD Digital OUT Optical Tomas VIDEO/AUXTomas MD Tomas Line OUTToma de esta unidad Toma del reproductor DVD Escucha DE Sonido Dolby Digital Conexiones SurroundOtras Seccion DE LA Platina GeneralidadesSeccion DEL Sintonizador Copyright Derechos DE Autor EspecificacionesCordon d’alimentation secteur Signification des symboles graphiquesAvertissement Energie électriqueLecture DE Disques Compacts SONReception Radio Lecture DE Cassettes3Connecter les enceintes surround Connexions1Connecter l’enceinte droite à l’appareil principal 2Connecter l’enceinte gaucheà l’appareil principalPositionnement DES Enceintes Connexion D’UNE Antenne Exterieure TelecommandeAppuyer sur ECO Mode VariateurAvant L’UTILISATION Fenetre ClignotanteAppuyer sur Enter ou a Reglage DE L’HORLOGEAppuyer sur Clock Systeme Super T-BASS Reglages AudioSysteme BBE High Egaliseur GraphiqueSelection D’UNE Courbe ’EGALISATION Programmee Reglage Manuel D’UNE Nouvelle Courbe D’EGALISATIONDans les huit secondes, appuyer sur Enter Selection D’UN Mode Surround DSP ProgrammeSurround DSP Memorisation DES Nouvelles Courbes D’EGALISATIONAppuyer sur f Down ou g UP pour sélectionner une station Accord ManuelMemorisation DE Stations Accord PAR Numero DE PrereglageAppuyer sur d pour démarrer la lecture Operations DE BaseAu sujet des cassettes Lecture ContinueSenseur DE Musique Cassettes Mise EN Place DE DisquesLecture DE Disques Lecture Avec Saut DES Blancs Lecture ProgrammeeLecture ALEATOIRE/REPETEE Enregistrement Lecture DE Disques Compacts Enregistrement DE BaseInsertion D’ESPACES Blancs Pour arrêter la duplication Appuyer sur TAPE/DECK 1/2 pour sélectionner La platineInsérer la cassette dans la platine Appuyer sur w REC/REC Mute pour démarrer’enregistrement sur la première face Pour changer le programme de chaque face Répéter l’étape 5 pour le reste des plages de la Face aFace PRO Niveaux DES EnceintesAppuyer sur Dolby PRO Logic pour sélectionner Normal Régler le niveau sonore des enceintes centrale Et surroundAppuyer sur Dolby PRO Logic Lecture Avec LE Systeme Dolby PRO LogicAutres Modes Dolby PRO Logic Fonctions Vocal FADER/MULTIPLEX Mixage Avec MicrophoneProgramme DE Karaoke Pour annuler la minuterie d’arrêt Pour contrôler le temps restant jusqu’à la mise hors tensionPréparer la source Enregistrement Commande PAR MinuterieRégler le volume Appuyer sur Power pour mettre l’appareil hors TensionPour réinitialiser le jeu Demo Appuyer une fois sur sCaracteristiques Pour annuler le jeu DemoPrise CD Digital OUT Optical Prises VIDEO/AUXPrises MD Prises Line OUTPrises de cet apparei Ecoute DE SON Dolby Digital SurroundPartie Magnetocassette Soins ET EntretienGeneralites Partie TunerPartie amplificateur Appareil principal CX-NHMT75 GénéralitésPartie tuner FM Partie tuner AM

CX-NHMT75 specifications

The Aiwa CX-NHMT75 is a compact yet powerful mini audio system that showcases a blend of advanced technology and user-friendly features. Designed for music enthusiasts, the CX-NHMT75 is equipped to deliver high-quality sound in a stylish package, making it an ideal choice for home use or smaller living spaces.

One of the main features of the Aiwa CX-NHMT75 is its robust audio performance, which is ensured by a combination of a built-in CD player, cassette deck, and radio tuner. The system supports a variety of audio formats, allowing users to enjoy their favorite music from CDs, cassettes, or FM/AM radio. With its dynamic 2-way speakers, the CX-NHMT75 reproduces a wide range of frequencies, delivering clear highs and deep lows that enhance the overall listening experience.

In terms of connectivity, the Aiwa CX-NHMT75 offers multiple options for versatility. It includes auxiliary inputs that allow users to connect external devices such as smartphones or tablets. This feature enables seamless playback from various digital sources, accommodating the modern listener's habits. Additionally, the Bluetooth capability allows for wireless streaming from compatible devices, freeing users from the constraints of wired connections.

The Aiwa CX-NHMT75 also incorporates several modern technologies to enhance user experience. The system is designed with a user-friendly interface, complete with an LCD display that provides clear information about the current track, volume level, and other settings. Furthermore, the inclusion of a remote control adds convenience, allowing users to adjust the system from a distance.

Another highlight of the Aiwa CX-NHMT75 is its compact design, which makes it suitable for various room sizes without taking up too much space. The aesthetically pleasing cabinet finish and ergonomic design ensure that it not only sounds great but also looks good in any environment.

In summary, the Aiwa CX-NHMT75 is a versatile and feature-rich mini audio system that caters to diverse listening preferences. With its emphasis on sound quality, connectivity options, and user-friendly design, it stands out as a reliable choice for anyone looking to enhance their audio experience. Whether it’s for casual listening or hosting gatherings, the CX-NHMT75 delivers enjoyment and sophistication in one compact unit.
Top Page Image Contents